💡 SENSKY 19.7ft/6m Motion Activated LED Strip Light Kit for Gun Safe, Under Cabinet, Under Bed, Pantry, Kitchen, Stairway, Closet Lighting (White 6000-6500K) - Illuminate Your Spaces with SENSKY Motion Activated Lighting Review

Self-adhesive backing will not stick to felt or carpet. Requires mechanical T-pins or Velcro. The motion detector only works for 6 seconds. There is an adjustment in the junction box. See instructions online.

After I deciphered the instructions, the installation was successful. As with most Chinese instructions, it takes time to be understood. The LED strip sticks very well and illuminates the safe with a bright light, there are no dark spots anywhere in the safe (Winchester with 26 guns from the tractor delivery). There were a lot of LED strips for this job.

Finally, thanks to my lovely wife, I bought another gun cabinet and decided to put these lightbulbs in it. The motion sensor is great. Fully illuminates the interior for good visibility. I would recommend 3M magnetic strips for attaching the light strip, which is what I did. This makes it easier to place devices where they are needed. Great product - I recommend.

Not sure if this would work or not but good price to find out. Worked great, the on/off switch could be placed on the outside of the cabinet I put it in or the motion sensor inside. I ended up liking the motion sensor option better, and every time I break the closet plan, the light comes on. Much better than an Orion as a low power, battery operated light mounted over the inside of a closet. Highly recommended

I plug in my string of lights before installing ams they are a light strip. I emptied my safe and went through the top two levels, cutting and using parts from the kit. I used screw caps and tape to attach. When I attached the 3rd row, the headlights didn't work. I tried to cut the line and make changers. never fired the 3rd row. The part that works is great but doesn't have the energy to take them all off for a refund. I'll just buy another set and move on

We need something for the vault to light it up. I watched a YouTube video of a man using this lighting kit. So I searched and found her! And man, am I glad I did. Easy to install with T-bolts, easy to adjust the lighting time and most importantly they are very flexible so they can be easily bent around corners. I had doubts about the motion sensor of a cheap light kit, the light comes on every time the door is opened or the light changes. I haven't used their sticky side so I can't vouch for…

7 years ago I put together a solution for my biometric pistol safe which, following a home made one with a magnetic switch, lights up red when opened. On the other hand, this light strip kit is a complete solution and requires no instructions. You will receive 18 feet of fluorescent tape that can be separately cut and spliced into 3 separate strips using the patch cords provided. I used it on a full sized gun safe that used to look like a dark cave. Now it's like the supermarket: it's light…