Header banner
Revain logoHome Page
adapter for impact wrenches hex 1/4”f - square 1/2”f dewalt dt7508 logo

Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508 Review

2

·

Terrible

Revainrating 1.5 out of 5  
Rating 
1.5
Tools and Home Improvement, 🔧 Hardware, 🔩 Nails, Screws & Fasteners, 🔧 Hardware

View on AmazonView on ЯM

Media

(6)
img 1 attached to Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508
img 2 attached to Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508
img 3 attached to Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508
img 4 attached to Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508

Description of Adapter for impact wrenches hex 1/4”F - square 1/2”F DEWALT DT7508

Adapter for impact wrench. external square 1⁄2" - internal hexagon 1⁄4"Specifications of adapter Dewalt DT7508Type of tool bit holderMaterial CrMoImpact yesTool fit size 1/2" Female DRTool fit size 1/4" Female HEXParameters of packed goods Unit of goods: PieceWeight, kg: 0,11Length, mm : 160Width, mm: 77Height, mm: 30

Reviews

Global ratings 2
  • 5
    0
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 1 out of 5

I can't believe I paid for it, the quality is disgusting.

Bits sit well, tightly. The label is made for five plus - I believed in the authenticity of the product. As for the loose fit on the 1/2' square and the enlarged pin hole, it's quite possible that the devolte is so right, I don't know. Not suitable for Makita. Of course, you can use it, but I won't. There is a suion that the devolt has nothing to do with this nozzle.

Pros
  • did not like
Cons
  • Complete . The metal is raw, everything is in burrs, the latch walks with a creak and seizes on some burrs. It is unpleasant to hold such a ge in your hands. If it's DeVolt, then I don't buy DeVolts anymore. On my Makita impact, this nozzle sits with a backlash (I think that the square is squished), despite the fact that native Makit nozzles are mounted with a pleasant tightness. The hole for the pin is huge and does not match the Makitov one in place. Well, this bait is clearly not suitable for Makita, because in Makita native baits rest on the corners of the square, the center of the impact square is clearly not made for support. On native nozzles, respectively, there is a hole in this place, they do not rest on the middle. This DeVolt adapter has a blind hole (square), i. E. the shaft of the makita will support this nozzle with its middle, which is wrong. At the same time, i. E. when the devoltage nozzle rests on the end of the makita shaft, the hole for the pin falls deeper. As I already noted, the hole itself is larger in diameter (probably this is correct for devolt, I don’t know), so I won’t use this adapter with Makita so as not to spoil my tool. Well, that's enough on this . He scoffed with a file - raw metal.

Revainrating 2 out of 5

No joy in buying the product, it's not good.

I managed to buy cheaper for 690, and I think I overpaid a lot, firstly, it plays a lot on my own wrench, and secondly, it’s all kind of clumsy, the retaining ring is crooked and it was very bent, it’s about to fly off, I took it off bent, I think it’s like, but I don’t recommend because the price is unrealistic for such quality. For 200-300 you can take