Header banner
Revain logoHome Page
adapter gsmin kp11 pci-e x4 x8 x16 to ngff m.2 nvme ahci ssd for xp941,sm951,pm951,a110 (black) logo

Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black) Review

2

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
Computers, 💻 Computer Components, 🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(3)
img 1 attached to Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)
img 2 attached to Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)
img 3 attached to Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)

Photos by authors

(2)
img 4 attached to Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)
img 5 attached to Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)

Description of Adapter GSMIN KP11 PCI-E X4 X8 X16 to NGFF M.2 NVME AHCI SSD for XP941,SM951,PM951,A110 (Black)

To increase the capabilities of your personal computer and add equipment, sometimes you need to install a special adapter. Model GSMIN KP11 will help you to use an additional SSD-drive. The GSMIN KP11 adapter uses the M-Key interface for SSD. Supports M.2 NVMe drives, works with PCI-E 3.0 X4 X8 X16 v.3 slots. It can be used without any additional software, installation of drivers and applications in operating systems: iOS, Win8 and Win10, Linux. Requires motherboard chipset to be Intel 9 series or higher. Provides high speed of information transfer, writing and reading. Attention, the adapter does not support SATA M.2 NGFF SSD. Sometimes you need to adjust the BIOS settings so that the computer system can recognize the drive installed using the adapter.

Reviews

Global ratings 2
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Full compliance with the manufacturers assurances, high quality.

Works in PCI-E2. Therefore, the speed is only about 800MB/s. Addition: The speed became up to 1500MB / s in the same PCI-e 2 slot.

Pros
  • Quality build, it works.
Cons
  • No threaded holes. The complete screw from the SSD does not fit. Prikolhozil on a nylon screw with a gasket of washers.

Revainrating 5 out of 5

The best thing I've ever used, I recommend it to everyone!

For this money, wanting something more is just stupid. The adapter works fine on a FM2A68M-DG3+ motherboard with an Apacer AS2280P2 SSD, which has a read speed of 1580 MB/s and a write speed of 950 MB/s. The results of the speed through the adapter can be seen on the screen. For comparison: through a similar adapter on the pci-e 2.0 bus, this SSD gave out only 350/180 read / write, respectively.

Pros
  • Price, does not cut speed, ease of installation
Cons
  • Lack of a bracket for attaching to a PC case