AeroCool Silent Master 200Mm Red Review

4th set of 200mm fans I've tried over the past few weeks. The included screws are by far the worst, but unlike other cheaper fans I've tried, these don't make any noise as they work on the inner roof of the case, pulling hot air up and out. The screws don't fit well. , and since the body screw holes are not pre-drilled, considerable force is required to tap the threads. This results in you getting a 3/4 stripped screw as the screw itself is so badly seated that it cannot 100% lock without some…

Ideal for Corsair 600T case that requires thin 20mm fan. I replaced the top and front fans with them as the original ones were 5 years old and the bearings were on so they were vibrating and making noise. If you need a thin fan for your case, this is a good choice. The fan features a single cable with a standard motherboard connector and a 4-pin Molex connector. It's nice to have a 4 pin option as it's very difficult to get to the motherboard fan connectors. The only problem I could see is that

AeroCool is a great 200mm fan in a blue LED package. The main reasons I bought this particular fan was its size and low noise level. The size of the fan was really important because I have a Corsair 600T case that's a couple of years old but still meets all of my upgrade needs including installing a new fan; However, there is very little room for a 200mm fan in the front. Right behind the fan are the drive bays that can hold five drives, so I need a good intake fan to keep that place cool. Due…