💰 ASRock H510 PRO BTC+ LGA 1200 Intel H510 Motherboard for Cryptocurrency Mining (BTC) Review

Reflecting on my product journey.Got pros: Corresponds to the description and characteristics Some cons: While there is no operating experience, I did not find

I understand that the sixth, eighth, fourteenth card does not start, but for the first one not to start, this is unique. As a result, the most problematic MP of all that I have met.

To enable 5+ cards, you need to change individual parameter values ​​in the BIOS: primary graph. adapter = onboard; Above 4g Decoding = in use; C. A.M. = not used; Vt-d = not used; SR-IOV Support = not used; DMI Link Speed ​​= Gen1; PCIE1-PCIE6=Gen1; M_Port = Gen1. Has some pros 1. Built-in Power, Reset buttons. 2. Built-in power supply synchronizers: 3 units can be connected. 3. Built-in speaker. 4. At startup, self-testing of video cards in PCI-E slots is launched with their graphical display

To flash the BIOS over the network, a USB flash drive is required, the connector must be selected only 2.0. Bios in 2022 is not translated correctly. Minimum settings. The overall rating is 8 out of 10. As far as there are no competitors on the market, the motherboard is the best! I recommend. Pros below: Price, no riser connection, many connectors, high hashrate unlike risers, 2022-language BIOS. Cons below: Very thin textolite, the motherboard works with new cards only after flashing the…

Works great with a flash drive, does not require the installation of an SSD, which is much more convenient for me personally, does not freeze, does not bug, I have personally worked with several of these boards for more than a year, and there were no problems with any of them, I have not yet connected the seventh card via HDMI, I want to try soon. It is convenient to connect an additional power supply, if necessary. I recommend to all!

My M.2 hard drive is working fine. You need to read the fine print, no PCIe mkey hard drives. Otherwise plug and play. Your name is Dilbert if you can't get the board to work and fix the same problems over and over again. I am getting older. I often read reviews as I read many DOA. I have never received anything DOA. I'm disappointed

BIOS do not update. The original was more stable, but you can't go back unless you copy it first. I can't get m.2 to work. This is the second board I've tried. The POST diagnostics screen is very useful. The gigabit network chip will not work until you install a driver for it. So if you don't have a plug and play graphics card, you can't get video output because the operating system can't find drivers until it has LAN. And you can load LAN drivers without video output. So I strongly recommend…

I've been in IT for 20 years, so I know how to set up a motherboard. Hundreds of computers built) Nothing I set in the BIOS allowed HDMI to work after posting. It will enter the PCIE card installation screen and then turn off. I've tried all the settings in the BIOS, including making sure the built-in card is always enabled. Nothing worked, even updated the BIOS (which doesn't work properly when running the application in the BIOS as it just says the server was not found, so I had to install it