🔧 BECKARNLEY 036-2042 Valve Cover Gasket Kit Review

Supplied in a large box. Everything is beautiful and whole. The screws are not broken because they cannot be screwed too high. The feed was of very good quality. If you have a large oil leak, you most likely have broken studs. I had 5 broken rivets on the bottom of the lid. I would go with this kit as it also comes with screws.

. Previous screws cannot be reused in this application. So I was very dependent on this product. However, quality control is clearly lacking at Beck Arnley as some of the screws in this set are actually OVAL section and serrated threads. Nobody sells them individually and Beck Arnley is not interested in helping me solve the problem. Problem. So I'll be forced to buy a new set for $30 or $40. I will not be buying any more Beck Arnley products in the future.

Ideal for metal rocker covers. Also, don't be surprised if your head bolts are broken. Don't worry I had two in the front bottom corner and they were easy to remove. You can use a flathead screwdriver or a sharp awl to unscrew them. I think I used a light drill for one because it was deep in the screw hole. Wear gloves, it's a bit messy and I recommend a respirator so you don't inhale the gas fumes. It took me about 6 hours, mainly cleaning the dirty surface of the lid, being careful not to…

Packaging was perfect, no creases, good protection. The kit is perfect for my 2006 BMW e90 330i with N52 engine. The gasket material is metallic, exactly the same color and consistency as the OEM gasket. The only minor difference was the bolt size for the 3 valve center cap bolts (the ones with extended bushings). The OEM was the same size as the rim bolts but in this kit these center bolts are slightly larger but the threads were the same so they still fitted perfectly but used a different…