1.5 Inch Leveling Lift Kit Compatible With 2004-2022 F150，Leveling Lift Kit Fit For 2004-2022 F150 2WD 4WD Forged Front Strut Spacers Raise The Front Of Your F150 By 1.5 Review

These did not level my truck, they ended up lifting my 05 f-150 4X4 5” in the front . The lift was way to much, after the install the front end was 2”higher than the rear and the upper control arms were extended all the way into the strut coils. I even bought new $900 Delta Icon upper control arms and they still hit the coils. I ended up just taking them out. I Just order 1/2” levelers hoping those raise it an inch or 1.5 I’ll see how that goes.

Can you believe this dirty practice of reshipping used items? The 2 inch lift kit had blue nut and bolt glue still on the aluminum metal donut. Come on!

The 2.5" levelers do NOT fit the 2009 (up to 2014?) style F150 4x4. (Two wheel drive should be fine.) They install and look nice. However, the rubber CV axle grease boot rubs hard against the raised section of the lower control arm where the bottom of the struts mounts. This will shred the grease boot as soon as you engage for wheel drive. This is specific to the 4x4 and is most noticeable when the wheel is turned out. *The smaller sizes MIGHT FIT.*

Purchased for my 2018 Ford F150, an awesome quality lift kit. It give you more ground clearance and level the truck. Thanks for attention.

The blocks were good and heavy. Would've gave 5 stars but it only came with 4 nuts and 4 bolts. Had to go buy some because they wouldn't just resend them and I didn't have time to send the first one back and wait on another.

It's a 2 person job during install. One person inserts strut, and the other prys the lower control arm down. After installation I would recommend an alignment. The kit caused mine to be about a full degree of negative toe.

I only wanted to raise my f150- 2019By 1.5 inches. This kit raised it 2 inches. It's a lot of work to change to a smaller lift after it is done.

Easy install you do need to separate the upper ball joint and tie rod.Makes it much easier to re install the strut if you knock out the 2 studs on the bottom then just put them back in after you get the strut in and draw them in with the nuts.

Product did not come with any instructions. My mechanic, who is ASE Certified and has been doing all sorts of lift kits had nothing nice to say with this kit. The spacers up front, do not match the truck! Tech support? There is none! As for the name, Richeer, it is completely nonexistent! Please do not buy this product because you will have to pay the mechanic or waste an entire day trying to make this product fit to later realize you will have to return it! Revain should shut this outfit down!

Relatively easy installation. After learning the process on the first side, the second took 10 minutes. The spacers and hardware are good quality. This kit definitely improved the look of my truck.

I didn't receive the complete lift kit, the only items here is the rears, the front wasn't in the box, so much for quality control.

Well lets start off with that it does look good on my truck but it's not that easy to install. The rear is not very hard but it will take 2 people. One to pry with crowbar and one to install blocks. Now the front is where the trouble comes into play. The front spacer is made to where it goes between the shock and strut seat but if your strut is 180 degrees out you will have to loosen it all the way out and recompress it because it will not line up with the bolt pattern. Unless you have all the…

I got the front 3 inch kit and intalled it the same day. Super easy if you know how to use a pry bar and ratchet set. Does not take 2 people like others are saying. Great bang for your buck!