🔥 BETAFPV F4 AIO Brushless Flight Controller No RX 5A ESC Integrated 25mW VTX with BT2.0 Connector for FPV Whoop Drones (1-2S) - Compatible with Meteor75, Beta85 Pro 2 Review

Came with no antenna, no screws, no clothes… And it was used. someone soldered it and ruined the component. All plastic motor plugs are missing. TO UPDATE. AMAZON REPLACED. THE NEW BOARD IS SIMPLY GOOD.

It's like a third board. First the UFL connector came loose. Second, Vtx stopped working. Third, engine 4 failed. I don't know if it's because the board is thinner than other 1s boards so they don't last long.

Very good board. Just note the hand soldering on the pigtails that are attached to the board. You don't want the solder to jump to the next component that is very close. I had to unsolder one of the wires and reconnect it to another component.

Came with a bad ESC, should have checked before soldering to TBS Nano. So far BetaFPV 0 of 4 in purchases. Meteor75 blew up three ESCs in 30 seconds. I ordered a Meteor75 replacement for my money but received a non-TBS Meteor65 instead. returned. I ordered 8 batteries 1s with 2.0ph and nothing flies.

Delivered disassembled. Once connected to USB, smoke plugged into the Ligand. There were some family issues that were quite significant and the Juat never bothered to resolve the issue by trying to replace him. I'm pretty sure it was a board of chance. And they would trade it up if I did my best to contact them.

I am using this FC on a Nano 1s build with 0802 22 000kv motors and this is my favorite mic in my hangar. The stock firmware flies great and requires no configuration. Of course, depending on your specific build, some tweaking may be required. I have been flying this FC actively and trouble free for a few months now. Reliable FC for whoop and micro builds with 0802, 0703 engines etc.

Let's face it, BetaFPV has been on the "frontline" or "leader" for a long time. You stay in the foreground. None of their products have ever let me down, but when I've had a problem (or just wasn't properly informed) their customer service has been absolutely the best. This small, lightweight 1-2s FC has everything you need except your choice of receiver. I highly recommend it. 10 out of 5 stars Hallo Emma.-VRMan3D / Fred CassBuy!

After soldering the XT30 connector, DSMX receiver and camera and reassembling my assembly, I noticed that the direction of rotation of the motor was problematic. After not seeing the BLHeli support advertised on the product page I went down the cable cutting/soldering route but just wanted to give it a try. And it looks like I got lucky, BLHeli_S (via the BLHeli configurator) worked like a charm. , and that way I could change the direction of individual motors. Also, I had a weird "flip after…

This new flight controller from BetaFPV is perfect for building a light whoop. Set up was very easy for me as the VTX is built into the board so you just plug in the camera and the motors are also easy to hook up and then all that is required is soldering to install my receiver. The pinout was correct and I was able to connect to both Crossfire Nano and Frsky XM. I love that the antenna is attached with UFL so it's very easy to replace. I plan to use a Foxeer Lollipop to build a 75mm lens in…