Pros
- Well balanced. All fasteners for changing the angle and depth of cut are steel. As is the protective cover. The saw is not heavy. The presence of a case.
Cons
- I didn't find it.
Circular saw DeWALT DWE575K, 1600 W yellow Review
9
·
Excellent
Rating
5.0
Tools and Home Improvement, 🔧 Power & Hand Tools, 🔩 Power Tool Parts & Accessories, 🔧 Power & Hand Tools
Media
(8)
Photos by authors
(8)
Description of Circular saw DeWALT DWE575K, 1600 W yellow
Powerful high-performance circular saw for cross cutting and longitudinal dissolution of wood. Ruler for precise setting of cutting depth up to 67 mm. Multi-purpose circular saw for wood and fibreboard. Saw with low vibration and long service life. Additional handle for safe two-handed operation. Cutting at an angle up to 57°. Excellent balance for long lasting performance. Protective cover with excellent dust removal up to 95%
Pros
- The first saw and it's good that I chose it!
Cons
- No.
Pros
- Comfortable, lightweight, powerful.
Cons
- Price
Pros
- - Lightweight - quiet - well balanced - large cutting depth - excellent thin disc for wood with nails - cutting angle up to 57 degrees, good scale and fixed stops at angles of 22.5, 45, 57 degrees. - comfortable handle - easy adjustment of the angle and depth of cut - does not scatter sawdust when connecting a vacuum cleaner - handy case with space for additional disks - a long, thick, but soft cord in a rubber braid, you can carry a saw by the cord
Cons
- - millimeter backlash on the sole in depth - backlash parallel stop - inconvenient vacuum cleaner adapter (it must be removed before packing the saw in a case) - washed down at a fixed angle of 45 degrees, did not give those, the scale is lying by 2 degrees :(
Pros
- Liked almost everything. One of the largest cutting depths among classmates, the possibility of cutting at an angle and graduation for this, marking, it is very comfortable in the hand when working on ergonomics, working with an emphasis is convenient. Thick, durable outsole. Excellent power, a wet board 50mm along and across very easily on a standard disk that came with the kit. The presence of a case. A long strong power cord, boards of 6 meters spread along without running with a carry.
Cons
- From the factory, the angle between the disc and the sole was a little littered - it was easily adjusted. There is not much play in relation to the sole in the system for adjusting the depth of cut, in principle it is not critical. The case is enough for lapping, you just move the saw and it doesn’t close, it’s also impossible to close it with a nozzle for a vacuum cleaner, it has to be stored separately. When working without a vacuum cleaner, a lot of dust is generated, especially on dry material and a multi-toothed disc for a clean cut, and it scatters amazingly, exactly 3 meters. Work unequivocally in glasses, it often flies in the face when cutting.
Pros
- power stock drive balance ergonomics of holding key cord
Cons
- parallel stop no riving knife - semi-deficient engine landing - semi-flaw bearing sound when braking
