Cmple – 1 Port Keystone Wall Plate Single-Gang Wall Plate with Keystone Jack Insert - Ivory (10 Pack) Review

I bought 20 of these based on another review which found them a perfect Leviton plate replacement and compatible with Leviton Quickport sockets are. . Unfortunately they didn't succeed. The bushing holes are *close* to the correct dimensions. The openings are slightly smaller vertically (width is ok). I ended up having to cut about 1mm of material from the top of each hole to fit the Leviton bushings. In the end it took a very long time and used up all the savings I was hoping for by choosing…

I bought a 2 hole plate and a pair of 3 hole plates. Everything is selected as "white". However, while this 2 hole plate is pure white, the 3 hole plates are more of an almond or cream colour. So they'll probably be fine if you install them individually, but they won't look as good if you install them side-by-side or try to mix and match them with other brands' white sheets. very thin. If you connect a thick/rigid cable like RG59 coax to the back, the panel will noticeably pull/push and deform.

I bought these obviously because I have a lot of connections I want to make between walls. The only downside (and a big one for me) is that they're a bit big for the low voltage boards I've found. I've tried 4 or 5 different brands of low voltage mounting pads and they won't accept this pad without some modifications. However, they will work with remodeling the mounting plates, which takes almost as much time as cutting a hole in the wall and running cables - in other words, it takes quite a…