Header banner
Revain logoHome Page

Reviews

Global ratings 27
  • 5
    21
  • 4
    6
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

A valuable purchase, some advantages!

If you have 2.5 "disks (SSD or laptop HDD) - there are 4 seats on special brackets on the back side. If you have ordinary 3.5" drives, then you can put only 2 disks on the same brackets. But, thanks to the perforated case and shoulder arms, you can attach a few more drives both inside and outside the case. The case turned out to be very "creative". I liked it, although it is not without flaws.

Pros
  • Compact, but at the same time it can accommodate full-fledged ATX boards. The power supply is installed in any convenient place inside the case. You can put the case on 4 faces out of 6. Lots of room for cable management. The IceHammer IH-4500 tower climbed into the hull. Dust filters (two on magnets, one on the bottom with rubber clips) The panel with buttons and USB ports can be placed on any of the four faces on the side of the transparent acrylic cover. Plugs on the expansion slots - on the screws, and do not break out.
Cons
  • The stock case fan is mediocre. There may be installation problems if you have a long video card and a long power supply. Despite the abundance of holes, the ventilation in the case is a four due to the low density of these holes. For a good blowing, it is necessary to put additional turntables for blowing in and blowing out. And there is a nuance. Blow valves can make noise due to the same holes in the walls (this happened to me). To prevent noise, you need to put the fans on spacers (or a 140mm-120mm adapter). Materials for four: the iron is not very thick, the side wall is made of acrylic, the plastic kit is flimsy.

Revainrating 5 out of 5

The purchase brought only positive emotions.

The computer works under Linux Debian 9.0. The previously available 4 GB (2x2) is no longer enough - the pages of sites are getting heavier and heavier every year. 4 bars of 4 Giga each cost 6800 grouse to be delivered: if this amount is spread over at least 3 years, then this is not such a big price for a quiet, comfortable life. I don't play with toys. I read, write, listen and compose music; I look: sites, YouTube and movies on the hard drive. The above upgrade allows you to open 130 tabs in

Pros
  • It is this memory MODEL that is ideal for Intel i5 2.66 GHz processors for socket 1156 and the Gigabyte GA-P55-UD3 motherboard.
Cons
  • In the current situation, even an overpriced price, compared to modules for DDR4, is not a problem, since 16 gigabytes of memory, 3-5 years old, pushed back the upgrade of the system.

Revainrating 5 out of 5

Wonderful quality, one hundred percent satisfied!

An excellent case, it performs its function of ating a 12-year-old case with a bang. Worth every spent. You can safely close your eyes to the shortcomings when you look at the price tag. The case contains the necessary compromises, but they are absolutely not felt either during assembly or during operation. I recommend to buy if you need an ATX-case with small dimensions and ease of placement of drives.

Pros
  • compactness Sophistication of fasteners and hangers (SSD, HDD, coolers) Design (simple but nice) Not the worst metal We implement normal cable management Price Convenient Assembly Unusual USB module and buttons with the ability to change its position-orientation on the side wall The ability to put it on its side. (rubber feet on the side wall)
Cons
  • Bad bottom filter. Some sort of half-ass. It is not clear what prevented to make the same magnetic as on the roof and front side, even if without a picture. It would be much more convenient and easier. While I was assembling the computer, I hushed up a couple of corners of this filter, but it’s not critical, because it’s not visible on the bottom.) The acrylic glass is nicely tinted, but the rough edges and the fact that it's acrylic spoil the impression. Not very nice power and reset buttons. The absence of a remote button on the power supply. It will not work in which case just click on the toggle switch, since the power supply unit is inside the case and the button is inaccessible, and there is an extension cord for installing the power cable on the outside. But this is a sacrifice for such a layout.

Revainrating 5 out of 5

A great option for this money, I definitely recommend it!

I took two strips, the frequency is 2133, I didn’t overclock it - and everything suits without overclocking. There are no bells and whistles, thanks to the absence of heatsinks - it fits into the slots next to the tower cooler. It does not heat up, even under load the temperature does not climb up. Those who are warming up may need to reconsider the cooling system of the system unit. A 36-month warranty is pretty good (in current realities). I'm happy, I like it. Works good

Pros
  • Cost compared to peers Availability for purchase Manufacturer's warranty period
Cons
  • Someone may not like the lack of heatsinks or the design (it's normal, without the bells and whistles, as they used to do) There are no other problems and cannot be

Revainrating 4 out of 5

Everything is fine, I liked the product, I bought it for a reason.

I wanted to assemble a relatively productive config in a compact package, the choice fell on this one. Specs: a hot ryzen 3800x is cooled by a scythe mugen 5 tower (everything fits perfectly, height is around 155mm). Installed 120mm coolers for blowing / blowing: Noctua NF-P12 actually for blowing (due to the excellent static pressure) and Noctua NF-S12B for blowing. The temperature inside the case was thus able to stabilize without the appearance of unnecessary noise. As advised below - it is…

Pros
  • Compactness, layout of the internal space, ease of assembly, spaciousness.
Cons
  • I didn’t really like the materials (thin metal, plastic glass), there are some difficulties with blowing, a limitation on the height of the tower, the most dull regular cooler.

Revainrating 5 out of 5

Im amazed! It was definitely worth the money!

Pretty comfortable case, with good ventilation. The PSU can be installed on the front wall both from below and from above. The power connector on the outside is brought out through an adapter inside, so in order to switch the PSU to hybrid mode or turn it off completely, you have to remove the window and crawl between the PSU and the turntable. There were no problems with cable management. In my case, it was necessary to install two HDDs and one SATA SSD, but there were only two mounts for…

Pros
  • Quality, originality, compactness, convenience
Cons
  • - Only 2 slots for HDD/SSD - I gave it 4 out of 5 for the materials, only because the window is made of plastic, not glass.

Revainrating 5 out of 5

Everything in the product suited me, the price is generally perfect.

Changed the case of my old PC to this one. There were doubts about whether my 30 cm video card would fit, which were dispelled during assembly. A larger video card would fit. The case pleases with "mesh" walls, which allow to arrange excellent ventilation inside the case. I recommend the case to those who do not plan to build a system with more than 2 hard drives, who care about compactness, coupled with good cooling. The quality of the materials is top notch.

Pros
  • - Compact size. Nice design. - Suitable for ATX format motherboard. - I was pleased with the possibility of fixing the control unit in any part of the side wall. I fixed it from below, put it on the table - very convenient.
Cons
  • When placed inside an atx motherboard case, 140mm coolers can no longer be fixed to the bottom. Only 120mm. This is more of a feature than a drawback.