Header banner
Revain logoHome Page
deepcool gamma archer cpu air cooler with 120mm fan for intel and amd processors - high airflow design logo

DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design Review

37

·

Average

Revainrating 3.5 out of 5  
Rating 
3.3
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 2 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 3 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 4 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design

Photos by authors

(11)
img 5 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 6 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 7 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design
img 8 attached to DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design

Details

Item Dimensions LxWxH7.09 x 3.15 x 5.91 inches
BrandDEEPCOOL (DEEBF)
Voltage12 Volts
Wattage1.44 watts
Cooling MethodAir
Noise Level26.1 dB
See 3 more

Description of DEEPCOOL Gamma Archer CPU Air Cooler with 120mm Fan for Intel and AMD Processors - High Airflow Design

Product Characteristics

The DEEPCOOL Cooler Gamma Archer Airflow is a remarkable computer internal component that offers efficient cooling performance. With an impressive air flow rate of 54.25 CFM, this cooler ensures optimal ventilation to prevent overheating. Additionally, it operates at a low noise level of 26.1 decibels, ensuring a quiet computing experience. These characteristics make it an ideal choice for individuals who value both cooling efficiency and a peaceful working environment.

Similar Products

When comparing the DEEPCOOL Cooler Gamma Archer Airflow to similar products in the market, it stands out as a reliable and cost-effective option. Its airflow capacity and noise level make it competitive against other coolers in its price range. However, it's worth noting that there are alternatives available with higher air flow rates or lower noise levels, depending on specific requirements and preferences. It's recommended to explore similar products from reputable brands to find the most suitable cooler for your individual needs.

Problems Solved

The DEEPCOOL Cooler Gamma Archer Airflow effectively addresses two significant concerns for computer users: airflow and noise. By providing a robust air flow rate of 54.25 CFM, it ensures proper cooling of internal components, preventing overheating and potential damage. Additionally, its low noise level of 26.1 decibels minimizes distractions and allows for a quieter working environment. With this cooler, users can enjoy improved thermal performance and a more peaceful computing experience.

Important Parameters and Use for Education

When considering computer internal components like the DEEPCOOL Cooler Gamma Archer Airflow, it's important to focus on certain parameters. Apart from air flow and noise level, other crucial factors include compatibility with different CPU sockets, ease of installation, and overall build quality. By paying attention to these parameters, users can ensure a seamless integration of the cooler into their system, maximizing its effectiveness.

Moreover, the DEEPCOOL Cooler Gamma Archer Airflow can find valuable use in educational environments. Its efficient cooling capabilities can benefit computer labs, classrooms, and research facilities where multiple computers are used simultaneously. By maintaining optimal operating temperatures and reducing noise levels, this cooler contributes to a more conducive learning and working environment for students and educators alike.

Below is a numbered list of potential use cases for the DEEPCOOL Cooler Gamma Archer Airflow:

  • Personal desktop computers
  • Gaming rigs
  • Small business servers
  • Workstations
  • Computer labs
  • Classrooms
  • Research facilities

    • Air flow - 54.25 CFM. Noise level - 26.1 decibels

    Hide

    Reviews

    Global ratings 37
    • 5
      11
    • 4
      7
    • 3
      7
    • 2
      5
    • 1
      7

    Type of review

    Revainrating 4 out of 5

    Good value for money, I recommend it.

    Cool - cool, what else to ask for? Do overclocking under this, bet on some old 6-core atlons or 10900k? Obviously not about him. By the way, the mass of the radiator itself is 170g. For example, in the photo next to this archer - a radiator from some box from the 478th socket - weight 330g.

    Pros
    • - Design. So, no matter how strange it may sound, but just look at an ordinary box from some 1151: a small nondescript bag and a "huge" (special quotes) blue archer with a bizarre shape. The choice is clear. - Fan - "120" mm (why in quotes - see minuses) - lower speed to create the same flow as in 90s. We win in silence. - Fastening through a bracket. Not an obvious plus. But if you have Intel and decide to upgrade the cooler, you can use the secondary and find all sorts of incomplete COs from old systems - after all, you already have a mounting frame. In addition (I'm talking about archer now), for me personally, it's easier to install and remove than the ala boxing option through "bugs". - Heatsink height (pure heatsink, without fan) - 40mm + large gaps between the heatsink fins - a good option for installation in any slim case with (ala Foxconn rs-338) 80-100mm. You can remove the standard fan from the archer, and instead attach it to the case wall - 120/140mm with pwm. - The price is cheap and cheerful.
    Cons
    • - Non-standard fan. The seats of this fan are inside and form a square 48x48mm (the corners of the square are the center of the fastening screws). In the case of a fan replacement, you will have to make the mount yourself. - Maintenance-free (sealed) fan. No, it's not funny anymore. Tried to pry - does not lend itself. More than sure that soldered. (I saw this on some kind of glaciate - there, too, at first I thought that a plastic plug was pressed in. As a result, it turned out to be soldered, because when I even drilled a hole and tried to pry it, I did not succumb to the word "completely". Here, I I think the same). - Fan - 3 pin. And the real 3 pin. (Let me clarify. Some manufacturers do something to distinguish between models: they put the same fans, but one is soldered as 3 pins, and the other as 4 pins.) For the sake of interest, I even drilled out places for soldering the wire. 3 pin and there is no space for the 3rd wire on the board. I looked at the fan motor driver - the sip 4 case (having looked at the driver right away, it was possible not to drill, but didn’t think of something) marking 211 PG10T - I couldn’t find anything, but most likely it doesn’t differ much from the same Allegra A1262. - Like 120. That's just to the bottom of the fan there is a narrowing and the blades are "cut". Take a look at any 120 for a case. But this was done for obvious reasons - an attempt to increase the flow rate at the outlet (in fact, it would be interesting to compare, under the same conditions, the native fan on the archer and one of the dip cool catalog without narrowing (usual for the case) - the same uf120.)

    Revainrating 4 out of 5

    Good value for money, I recommend it.

    got around to buy a new cooler, the old one was noisy and could not cope, and took this miracle for 490. I had to remove the video card and pull out the RAM, unscrew the fan from the radiator and only then inserted it, under amd, it was obviously done in a wrong way, but when I turned it on, it went nuts, it was spinning at 1600 RPM, when the old one was threshing 4200 RPM, the idle temperature was not 55, but 30, under load not 78, but 40, just a miracle after almost 2 months, the thermal…

    Pros
    • low price beautiful view quiet multi-platform CPU and RAM cooling
    Cons
    • heavy installation 3pin connector low processor coverage a terrible gift, in the form of fresh thermal paste, Alya KPT 8

    Revainrating 2 out of 5

    Unsuccessful purchase, I am disappointed.

    I didn’t like Kullur, now it’s lying idle, it’s clear that it can’t be compared with the tower, but it doesn’t reach its maximum power dissipation either, if you take its older brothers Pro or ice edge. In general, it is not suitable for ryzen 5 without overclocking

    Pros
    • Honestly bribed the price, and this baby blows not bad
    Cons
    • It blows, of course, but to be honest, the cooling is very straight forward. Worth paying a little extra and getting something better. There is no copper at all, perhaps she would correct the situation

    Revainrating 3 out of 5

    Expected more from the purchase, but not the worst option.

    It is on the second PC under the i5 4590, it did not give out above 70 degrees with good lubrication, but still I advise you to buy a Deepcool archer bigpro with a copper end, it costs 400 more. I got this cooler for 300 and for this amount it is a good budget cooler, but with such disadvantages

    Pros
    • it's a cooler
    Cons
    • 1. The mount is terrible, if you haven’t had experience with such and you feel like a hand-ass, don’t buy, many people use a screwdriver to make the mount fall into place, the screwdriver flies off and hurts mom, don’t do it like that. But I learned how to properly install the cooler, if anyone needs it, I can show it. 2. Dust. if the dust gets into the cooler, it is sucked closer and closer to the processor, which makes it difficult to work, for a year I cleaned the PC 2 times and 2 times I saw dust getting stuck on the sides of the socket, I have to blow it off before applying new paste.

    Revainrating 5 out of 5

    Matches the description completely, very satisfied.

    Thermal paste was already applied out of the box, which is very convenient, the thermal paste is not bad. With the help of an adapter ring from the kit, this cooler was first installed on socket 775, then on socket 1200. At 775, motherboards cannot control the fan speed by voltage, so it thrashed at maximum speed, which created noise, tolerable, but it was impossible not to notice it. On the 1200 socket, the Gigabyte H410 MS2H motherboard regulates the speed by voltage, so there is no noise…

    Pros
    • Cools the i3-10100F to 60 degrees in the "AIDA 64" stress test with AVX instructions and is not particularly noisy, it also cools the VRM zone
    Cons
    • Noisy at maximum speed

    Revainrating 1 out of 5

    Disgusting, dissatisfied with the purchase.

    Suitable on an open bench if you need to quickly check something with power dissipation <= 65W - 70W. Checked it, it works. For control, a V7-38 voltmeter and a K-type thermocouple (XK, temperature measurement range 0° - 400°C) were used, the measurement accuracy of 0.1°C is determined by the calibration table.

    Revainrating 1 out of 5

    Lousy product, very low quality.

    On a quad-core phenomenon, the temperature is under 90 degrees! At the same time, it does not rise above 50 on a stock cooler. The area covers only 2/3 of the crystal. Completely useless cooler.

    Revainrating 5 out of 5

    I am delighted, the product is really worthy.

    On installation, in short, guys, I suffered until I took a felt-tip pen. You put on one loop, push the second with a pencil / felt-tip pen and then sit on the easy. The loop bends well, you can safely press Got pros: + Cost + Appearance + Apply thermal paste + Handles non-overclocked FX 6100 + Looks good With its cons: - On Ali you can order cheaper (but you have to wait) - Moderately noisy - Inconvenient installation

    Revainrating 5 out of 5

    A very high-quality product, I take it not for the first time.

    A great option if you are collecting a budget car. It blows not only the processor, but also the elements of the power circuit. Not recommended for top and overclocked versions. He makes 100% of his money. Got pros: Versatility, suitable for any platform. Democratic price. Large and quiet fan. Cons below: Disadvantages are a continuation of merits. Sharp corners of the radiator. For easy installation, you need to remove the board from the case.

    Revainrating 4 out of 5

    Impressions from the purchase are good, buy.

    Some say that it makes a lot of noise, but it works very quietly for me. A good model for my money, I advise you to consider it as an option. I have an Intel core 2 duo e7500 On the old one, it heated up to 70 degrees in the background after installing this cooler. .

    Revainrating 3 out of 5

    Normal quality, you can use it.

    I bought for silence for my E8500 - 40 ° C is kept in idle. 65 TDP works fine. It cost about 480. Also, then such a de set on the i5-2400 temperature of 29 ° C is kept in idle time in the winter, when the room is cool and without load (in office mode). The main disadvantage is that the speed is not regulated as a result of noise.

    Pros
    • price 120mm fan
    Cons
    • aluminum small contact patch 3 pin connector noise

    Revainrating 5 out of 5

    The perfect product for any user!

    Its pros: 1. Cools well, much better than the one I had before. 2. Quiet. 3. Inexpensive (took for 450r). Got cons: 1. The main drawback is a rather stupid fastener, you have to suffer with installation) 2. Pretty big, but it's not critical.

    Revainrating 1 out of 5

    What did I pay for? The product is a complete failure.

    With all of the extras and goodies that come with DeepCool's budget coolers, I do not recommend going with the Gamma Archer, and here are the reasons why: It was necessary to build the computer with the lowest possible price using components from the store (we don't consider second-hand ones at all because our friends really believe in the store's guarantee), so I decided to test out this cooler as a cooler (although I had taken gammamax300 in a couple of assemblies). What is the problem: 1…

    Pros
    • The absence of noise, the dimensions of the fan, and the cost
    Cons
    • The equipment is so subpar that even the instructions are printed directly onto the packaging rather than being provided on paper. The AM4 socket mount has terrible installation and poor craftsmanship overall.

    Revainrating 5 out of 5

    I didn³'t expect the quality to be this good.

    I decided to buy it since its price, 200 British pounds sterling, is exactly the same as the most affordable version of the Core i5 3550 CPU that I built. The difference in noise level between this option and the others, which was 21 dB, was the deciding factor. I don't know if I can hear it because in my case there are four additional 140 mm fans, even though they are set to the minimum speed, and two on the video card - the sound of a uniform wind is heard, but it is very quietly. I don't…

    Pros
    • 1. Pretty big fan. 2. The radiator and the blue blade plumage have a classy appearance. 3. Quiet, despite the fact that I haven't tried turning off any of the other coolers in the case. 4. Price 200.
    Cons
    • Did not make it public.

    Revainrating 4 out of 5

    Nice price, good quality.

    Intel Core i5-2500. In idle - 30-35 degrees. Medium loads - it heats up to 50-62 (quite logical, because the declared heat pack of the processor is not low - 95W). It copes with its task quite well due to the powerful air flow. But the lack of speed control and the inability to change the fan are very unpleasant factors. In general, the miracle did not happen. It's just a piece of aluminium, after all. Suitable for budget assemblies, where it is necessary to cool the power circuits on the…

    Pros
    • - Price. - Does its job well. - The cooler is relatively quiet at its constant 1600 rpm. - Conveniently placed on the board from Intel. - Blows the motherboard.
    Cons
    • - Absence of copper pipes. - Lack of 4pin (speed is not regulated, it always rotates to the maximum). - The fan cannot be replaced or serviced. - The base is small and does not cover the entire CPU cover. - Missing thermal paste. - Plastic mounts for intel wear out pretty quickly.

    Revainrating 1 out of 5

    Real junk, such a terrible quality still needs to be searched.

    DON'T TAKE YOURSELF FOR ANYTHING. I don’t know who designed it, but in my opinion it’s not a very smart person . RAM with radiators does not get, I had to remove the radiators in vain, it would be better to just throw this cooling into the trash and buy it better . it cools worse than stock from Intel, in which acceleration was not higher than 60 and stock 54 degrees.

    Pros
    • nothing
    Cons
    • it doesn’t cool well, it doesn’t accept heat from the processor well (thermal paste was first used by stock, then kpt-8, then I took an advanced one from a friend for 150 UAH (per tube) a difference of 3 degrees .

    Revainrating 1 out of 5

    Poor quality item, not what it needs.

    With all the bonuses and goodies of budget coolers from DeepCool, I do not recommend taking Gamma Archer, and here's why: It was necessary to assemble the cheapest possible computer using components from the store (we don’t consider second-hand ones at all, friends really believe in the store’s guarantee), I decided to try this cooler as a cooler (although I had taken gammamax300 in a couple of assemblies). What is wrong: 1. Ugly and uncomfortable packaging with thermal paste, in fact, they…

    Pros
    • Silence, fan size, value for money
    Cons
    • The most poor equipment, even the instructions are written on the box, and not on a piece of paper. Terrible installation and workmanship of the AM4 socket mount.

    Revainrating 2 out of 5

    I didn't like it, I don't recommend buying.

    I took three of these at different times. In all three cases, the cooler bends the motherboard like hell due to an indecently rigid pressure plate. Without a backplate, it just breaks the board. And backplates are only on AMD motherboards. Cools as well or even worse than boxed. Installation in the case is impossible: the motherboard always has to be removed. On the Asus P5E motherboard, with great difficulty, I climbed between the radiators for cooling the power circuits and the chipset. And

    Pros
    • colored blades Fan size
    Cons
    • Terrible fixture Small contact patch With great difficulty climbed between the radiators of the motherboard

    Revainrating 1 out of 5

    It can't be worse! A waste of money.

    I took it to replace the regular one from amd. In idle 60 (on a regular 50) under load it reached 85 and the PC rebooted, on a regular one it keeps 65. The percent atlon is 3Hz without overclocking. In general, for such money, this cooler can keep processors with TDP below 50 even without load. Yes, and it is without copper, only aluminum which does not remove heat as well.

    Pros
    • cheap, nice cooler.
    Cons
    • CPU overheating, terrible mounting design.