💥 Red Premium Heatsink for Digifast M.2 2280 SSD Review

This is a great heatsink for NVME drives. This receiver keeps the temperature of my addon on the nvme drive 2 to 4 degrees cooler than the heatsink drive that came with MB. I bought a second one to replace the original MB heatsink as it was so good on my extra drive.

The build quality of this cooler is really excellent. The point of this cooler is that it's really only suitable for SSDs that have chips on the top, not on both sides. If you have an SSD with only chips on it, then this is really a great cooler for you!

Purpose: Reduce controller temperature by maintaining nand flash temperature during recording. Test: I used Samsung Magician to run the benchmarks and heat up the nvme drive. . HWinfo was used to check the temperature of the controller. The thermal pad has been cut in half to ensure it only touches the controller and drum. There was no thermal pad on the NAND chips. Conclusion: I prefer the Jeyi Q150 Digifast for my use case. The controller stayed cooler in all tests. Digifast looks better in…

Digifast's heatsink paper box looks like a first-aid kit but is environmentally friendly. Box contains:. Red aluminum radiator. Black back. 8 screws and 1 screwdriver (2 extra screws). 2 x 0.75mm thermal pads. The heatsink and cover are well made and true to size with excellent finishes. Unlike most other heatsinks that require 2 thermal pads, this Digifast uses ONLY 1 fin spacing between the heatsink and the chip side of the M.2 SSD. a gap that allows air to circulate between that side and the

Modern electronics can get very hot. Nothing new. But is it worth it? After more than 50 years of working with electronics and about 80% of them with computers, my answer to this question is "NO". The hot work of the electronics wears out the components. Expensive components may not fail first, but nearly EVERY failure in a system with billions of components will likely cause your system to fail. When it comes to storage devices, you have to be doubly careful. If the data you store is important