Digital flatbed oscilloscope FNIRSI 1013D (2 channels, 100 MHz) Review

The NIRSI 1013D digital flatbed oscilloscope (2 channels, 100 MHz) is a portable two-channel oscilloscope with a signal bandwidth of up to 100 MHz. The oscilloscope is equipped with a color waveform display and a built-in lithium battery for up to 4 hours of continuous operation. Vertical resolution 8 bits, high sampling rate. The device is equipped with an internal memory of 1 GB for storing 1000 signals and a microUSB interface for connecting to a computer. The oscilloscope is designed for diagnostics and tuning of radio and electronic equipment. Characteristics: Number of channels 2 Bandwidth 100 MHz Sampling frequency 1 GS/s Recording depth 240 Kb Input parameters Input isolation DC, AC Input impedance 1 MΩ Sensor attenuation coefficient setting 1 X, 10 X Maximum input voltage 40 V (1 X), 400 V (10 X) Horizontal system Coefficient 50s/div - 10ns/divVertical system Vertical 50mV/div - 500V/divRise time < 3nsVertical resolution 8 bitVoltage accuracy ± 2%Frequency accuracy ± 0.01%Timing systemTiming modes auto, normal, single edge (falling / falling) Measuring systemAutomatic measurements VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty +, Duty-, Time +, Time-, PeriodXY cursor measurements, Y triggerDisplay TFT color display, 7", 800 x 480 points Power supply built-in 6000 mAh lithium battery, 4 hours continuous operation, 5 hours charge USB interface (5 V / 2 A) Built-in memory 1 GB Waveform storage 1000 images + 1000 signals :NIRSI 1013D oscilloscope - 1 oscilloscope probe - 1 pc USB cable - 1 instruction manual - 1 pc