🚗 Upgrade Your Jeep Grand Cherokee with DNA Motoring HL-OH-JGC99-BK-CL1 Black Clear Headlights Assembly Replacement! Review

The headlights arrived quickly and match my 2003 Jeep Grand Cherokee Laredo perfectly; Then I thought about how to set it up. Headlights came without instructions. (no instructions in disclaimer) Dude, I used a long 7mm extension to adjust it. I finally realized. You must use a long Phillips screwdriver. Turn clockwise to raise and counterclockwise to lower. I asked the community if anyone knows how to set it up, but got no answers.

Need a label or something that tells you which way to turn the screw to adjust the light up or down! Trail and Error may remove the settings as they are different from the OEM settings. You need to remove the battery or airbox to try the adjustment after installation, and then adjust with a Phillips screwdriver or socket on the back. The lights look really good though. I might or might not have bought them if I had known about the adjustment mechanisms. A photo from behind is required for…

I bought it on December 28, 2018 and only got around to installing it tonight. The controller is a joke. It doesn't use a long screw that you can access from the top of the headlight to adjust the beam. But I would have looked into that BUT when I tried to fit the bulbs into the housing the low beam bulb was so loose in the socket that the headlight was hanging out in the socket! It was unreliable so it wouldn't close while driving and partially fell out. GARBAGE!

They are sized to match the headlight shells. And the screw holes match. But the latches in the studs don't go deep enough to fit properly in the sockets. Includes one or two for each headlight (there are 3 studs/bushings per headlight). In addition, the holes for the light sockets are small. They work, but some of the holes are a little loose and others are very tight - almost to the point where they need a reamer to install them. Excellent price. A little more attention to detail and that…

These designs look AWESOME and the product quality is comparable to OEM headlights. I installed them on my 2000 v8 WJ as I felt my Jeep really lacked the exterior and my headlights were original and fogged up to the point that they were starting to block the light. I have attached before and after photos. These things look gross on my Jeep and I didn't think I could attach more to my little one, but these headlights took 100k away from the exterior and greatly improved the Jeep's aesthetics…

headlights arrived well packaged and intact. The quality looked good and the first impression was very positive. As mentioned in other reviews the adjusters are not the same as the factory headlights and the headlights have to be removed to adjust the aiming point. I've had problems with the headlight bulbs dangling a lot in their sockets, which others have reported as well. What led to the 2 starts was the fact that the turn signals did NOT fit into their sockets with much persuasion. I…

Looks much better than the original I replaced. Fairly well aligned to the mounting points and have a decent, even light that's better than the old factory. They have some issues that I could easily have given less stars if the price wasn't so low. The biggest problem I had was the right hand low beam connector unscrewing during installation. Not a problem with the bulb, but with a thin body and a slightly enlarged hole that isn't obscured by the o-ring on the bulb. This allows moisture to get…