Description of 🌡️ Easycargo Conductive Heatsink Interface Transistors: Enhanced Cooling Solutions for Optimal Performance
Thermal conductive compound paste/grease. Thermal conductivity > 1.42 W/m-k. Thermal resistance < 0.252 k-in/W. Working Temperature: -30/280°c. Can be applied for cooling the interface of heatsink and LED CPU GPU IC Chips VGA Transistors.
Used this on a Behringer Inuke nu6000dsp which I have overhauled and 4 months later it's still running with no overheating issues. Note. There's a lot more paste in this little jar than you might think. I could probably fix 25 amps and have some left over.
Worst paste I've ever used, I've tried 3 times and all 3 times the same result. At full load my processor temp jumps to 97°C and at idle it stays at 50°C. Meanwhile before I replaced my old thermal paste my idle temp was 32°C and at full load 65°C so this paste made my computer much worse ran as he was.
My 17 year old garage door opener (old fashioned) has misfires. I opened it up and plugged the connectors onto the board, there was a power/signal error. I use this conductive grease on the silver 1/2 long pins that the board connects to. How corrosion is not visible to the eye. Now it works, but there can be a bad board that flexes and loses power with use.