🔗 High-Quality Timing Chain Kit ECCPP for 1999-2004 Dodge Dakota, Durango, and Ram 1500 Review

After 300 miles the chain has stretched enough to skip time. Very bad product. A return in the small return window is not possible.

Junk! Less than 250 miles and it's long enough to jump in time. There's a reason premium kits start at $300 and cost $94. Now I can buy a new one and pay to install it again.

I ordered this set and one of the gears broke off and had to use the old one. So far nobody has tried to replace a defective part. this is 3 months ago. The parts fit, but the timing gear was chipped and I wouldn't put a broken gear in my truck. do not buy from this company

Not recommended. I have only used timing chains, timing chain tensioners and timing chain guides. The holes on the main sprocket were misaligned, I couldn't align the chains properly. The timing sensor holes on the right upper timing sprocket were different than the original ones.

This product would be good if done right I have a 2002 Dodge 4.9 V-8 and the right head camshaft was because I installed the V-6 without looking at it closely, the transmission said V-8 but the cam sensor screen was for a V-6 and caused a lot of headaches.

listed as JTEC but had an NGC 32 cam pulley after assembly and it won't start and although I know everything is installed correctly (25 yrs Ase Master Tech), was It was easy for me to figure out what the problem was, but ripping everything apart to use an old cam was not what I was hoping for. A NOTICE. Always check and compare important parts

is listed as JTEC but it had a 32 tooth NGC cam after putting everything together and it wouldn't start and knowing everything was installed correctly (25 years Ase Master Tech) it was for just trying to figure out what the problem is, but ripping everything back to use the old cam wasn't what I was hoping for. A NOTICE. Always check and compare important parts

Everything went well. So far I've only driven about 100 km with it. Jeep Grand Cherokee 2004 The box was opened when the goods were delivered. Need better packaging. One thing I didn't like was that the large idler wheel wasn't pressed against the idler pulley. I used a vise to hold it. I also put on an external locking ring to hold it in place in case the press fit doesn't hold. It should already be pressed by the manufacturer.

This kit installs. Disassembled and found nothing with tax marks. Collected again. Again no start. During disassembly it was found that the right camshaft sprocket sensor was not attached to the sprocket in the correct position. Due to the time already spent on this we couldn't wait to send the entire kit back and wait for a replacement kit. We have another sprocket with a properly configured sensor. Starts and runs without problems. I would like to raise this issue directly with someone…

Let's see what I don't like? Doing that timing twice and spending 20 hours diagnosing why my truck WON'T start, spending 8 hours taking it apart and replacing the timing chain with my own sucks! Sync lobe is wrong! I only realized this after reading other people's complaints! With an Amazon recommended rating of 4.5 stars out of 5, I made the mistake of not reading these complaints BEFORE I bought this junk. Someone owes me about $2,000 with hardship and suffering. And with complaints that the…