💡 E17 E12 Adapter Converters for Electop Review

These adapters solve the problem by getting rid of hard-to-reach E17 light bulbs. The only problem is that the adapter goes so deep into the socket that it's almost impossible to tighten. On first use, 2 sockets between the bulb and adapter bent, causing the adapters to burn a bit. Luckily there were 5 adapters in the kit and I only needed 3. I replaced the damaged adapters and tightened them with the bulbs enough that I felt the bulb would come loose from the base. I then removed the bulbs and

Although these adapters are made of unmolded, high temperature plastic as shown in the photo, they are of high quality and cost $1.25 each, which is the best buy on the web. Please note that these adapters are used to fit a candelabra lamp into an intermediate socket. Also, they add about 0.6 inches to the overall length of the lamp due to the thickness of the base. All joints are well soldered, the brass is bright and crisp, and the inner insulator looks like resin-impregnated fiberglass. That