💻 Enhance Your Workspace: Versatile and Budget-Friendly Under Desk PC Mount with Adjustable Straps and Sturdy Steel Bracket Review

Really sturdy and good hardware included. I would recommend when trying to get it mounted to have something to balance your item on or have a friend with you to hold it up. Measure your straps and bracket location prior to mounting it to the bottom of your desk and just loosen a little to get your item slotted and and then tighten. I mounted my sub under my desk and it works great. Very sturdy.

Bought this to hang a mini-itx PC underneath a desk.Pros:- Cheap- Can be installed alone if you're able to flip your desk over.- Strap design allows for airflow underneath the case (if your PC has bottom case fans this is a plus).Cons:- Straps are all over the place, hard to re-adjust the size.- It's not super easy to install, even after drilling it requires some consideration on how to size the straps and get the PC inside.- You need a drill to do it properly.Conclusion:For the price, it's…

Didn't purchase this for a CPU but a large sub-woofer. The dimensions aren't standard CPU dimensions so the flexibility of the straps and brackets was a driving factor. Works great!

This setup is well made; and is a great addition to my vwindesk standing desk. Originally I tried one of those 3-sided CPU holders and it was comically undersized for my gaming case. Like it looked as if it would drop my PC on the floor in under a month.To install this one, I used some additional hardware from here and other places;4x 5"x3" black brackets from amazon to hang the CPU Support brackets under the desk support bars2x 1" MCBBLK Black Oxide Metal Cam Buckles from Strapworks (not…

It came nicely packaged. It was exactly what I was expecting. No assembly required. I just screwed it into my desk and it hangs great. I would buy it again.

I had my doubts but I'm satisfied with the function and quality of this mount. I use it for my UPS which weighs about 20 pounds. Works like a champ. Another reviewer suggested sizing the straps on the item you're going to suspend before you mount it. I wish I'd have done that as it was a bit of a pain adjusting the straps with the UPS in place. All in all I recommend and would purchase again.

I used two of these to mount an Xbox and a battery backup to the bottom of a sit and stand desk. The straps were a little bulky with some of the extras on them so I simply removed some of it and used wire velcro holders to cleanly keep the extra strap hidden after mounting. The screws were the perfect size and I didn’t have to get smaller ones or worry about drilling through the desk.

Works great! I needed a way to mount the subwoofer under my desk and this did the trick. Now my desk has no limitations to its height adjustment. Was very easy and quick to install and setup too. It came with foam inserts to help with vibrations and noise when the top case rests on the metal mounts which was perfect for a subwoofer.

I cannot get it to tighten. The straps are terrible. I still have a good inch of space from the top brackets and just cannot tighten them any more. Unless you have an empty and cheap plastic case, you're just fighting the weight of the case.I would recommend that, if possible, you flip the desk upside down and install it that way so that the weight of the PC rests against the bottom of the desk and would make it easier to tighten the straps. This wasn't an option for me as I have things…

I was a little hesitant but this worked out great. Make sure you predrill the holes. I would recommend you hand tighten the screws and set the torque on your drill/driver pretty low. Don't even bother with an impact driver; the screws aren't that strong.

Mounted this under my new desk and am holding a pretty heavy and large PC in it. Others mentioned breaking the buckles when tightening, so I just took my time and didn't "crank" on the straps and got it solid and secure without any major issues.I reduced by 1 star because while it is very good, it isn't perfect. One of the straps was fed through the metal brackets wrong. I didn't notice this until the brackets were mounted under the desk. Getting things adjusted wasn't hard, but this was a…

I’ve read previous reviews and agree that straps are plastic, and probably easy to break. So I bought metal replacements, and was able to pull as hard as I wanted.Also, I’d appreciate if they included two-sided stick tape, as an addition to screws. There are 4 screws on each side, I doubted they would hold, so glued them both to my desk.Also, I’d appreciate soft tape to cover the screw caps, so it wouldn’t scratch my equipment.Overall, I like that holder is size agnostic, and happy with…

After an hour to working to get this Installed and wrestling with the CPU to get it on top of the straps the tightener failed. Cheap thin plastic broke under the weight of the CPU. What a waste of time and Money.

Waste of money, sadly. Getting a PC straddled in this was a giant hassle and I didn't feel comfortable with the quality of the straps securing my new PC.

The CPU Holder has worked well for under desk suspension of tower cases of varying size. With a bit of adjustment, it is being used to suspend a sub woofer too (use the foam insulators to prevent vibrations). I own six of these and removing floor clutter on a three foot deep by fourteen foot long desk yields an incredible difference in appearance and functionality. Nice to be able to safely vacuum under my desk. I plan to use one on a stand up desk that is being built and expect the same…

I used this for a large Backup power supply and it works great for this purpose. The mounts had to be mounded closer that would normally be and there was a bit of extra webbing, which is not an issue. It handles the weight which is more than a normal PC very well and does not move around much at all.