🧽 ESUN CLEANING Filament: Optimal Solution for Printer Cleaning Review

This makes cold drawing easier. You have to do this a little differently than with nylon or ABS: heat the hotend to the temperature of the filament to be cleaned. Then slide in enough cleaning floss until it becomes transparent. Then allow the hot end to cool completely. Reheat to 90°C, then pull firmly but gently. don't hold on Just keep constant upward pressure. As the filament heats up, it begins to pull upwards, effectively thinning the filament and pulling it away from the walls and nozzle

I designed my printer to work with as many types of media as possible, so I print with a wide variety of filaments at various temperatures, including abrasives. When designing and printing with different materials, it is often advantageous to change the nozzle size as well. All of this combined can clog the extruder with poor maintenance, which is why I bought this special cleaning filament from eSUN to ensure smooth extrusion. It was packaged in a vacuum bag with desiccant, product manual and…

This is a cleaning filament and it seems to do what I need. I've used it after every filament change, especially when the filament needs to be printed at a temperature significantly different from the previous one. If there is remnant from a previous filament that ran at unsupported temperatures, you can see blockages here. The instructions for use are pretty vague, but here's what I do. Switch to PLA at 200°C. I raise the Z-axis about 100mm above the bed to see the filament coming out of the…