🔑 Enhance Your Kia's Key with Febrytold Remote Key Shell - 2 Pcs Flip Key Fob Remote Shell with Blade for Select Kia Models (2010-2014) and Bonus Screwdriver Included! Review

Definitely a good price IF YOU HAVE A GENERAL UNDERSTANDING OF ASSEMBLY. Note that the key you have will match the spring cap you have. So you can't just change keys, you need to change keys with a pair of spring caps. It works well, as expected, since the actual technology powers the car and not the key fob. There are no instructions but since they send you 2 in a pack you can play around with one to get an idea of how it works.

My car key ran out of lock and unlock buttons. I bought this bundle with two keychains and a small screwdriver. Fixing the knobs turned out to be a lot easier than I thought. I removed the damaged buttons on the fob and replaced them with new buttons (which had to be manually removed from a new fob). It worked great. If you have major damage to the original key fob, e.g. B. If you lose your key or cannot open your car door, you must follow the instructions on the tube or packaging.

2012 Kia Soul key fob. The parts it comes with work great and it looks like it will work with old parts. After I put my key in the new case, BOTH the blocks I replaced don't work with the key at all. The key must be constantly pushed out, otherwise there is a risk that it will get stuck in the body. Using an old button from an old key fob renders the button barely usable, the key latch disengages with a simple shake of the key. All in all, my two key fobs were completely unusable, and with…

Easiest transition. Remove the battery cover and remove the battery. Use a flathead screwdriver to remove the case. Be careful not to lose the spring or button of both the old case and the new case! If necessary, transfer the chip. To turn the spring, add the spring and knob to the key. Gently turn the key counterclockwise until the spring is on the small ledge, then close the key. While holding the pressure, reattach the front of the case and that's it! I used the flat head to take off the…

All the people with negative reviews obviously didn't read what they ordered. This is an empty shell. This is exactly what I wanted as the electronics and key for my Kia still worked perfectly - the rubber buttons were just starting to rot. Five minutes to rearrange the chipboard and key and I have a brand new key fob. You will need to wind the spring once when installing the key blade to ensure it pops out when you press the release button. Just watch carefully as you take apart your original…

What a great kit! Be careful when opening small packages as the one screw that each keychain comes with is tiny. I would suggest having needle nose pliers and a small flathead screwdriver handy in addition to the small Phillips screwdriver that came with it. I followed the instructions on the YouTube video (a screenshot of the video I used is attached to this review) and it worked great. Very satisfied! It was a little tricky to get the knob right and for some reason using the old knob worked…

Two at this price were great considering how much it would cost to replace at the dealer. My wife's and mine's buttons were pretty worn out so I swapped out the electronics on both of them. Dismantling the old one is difficult, but possible. On mine I just changed the whole key/hinge/spring from the old to the new to get my key moving. The only complaint I have is that the loop that holds the key on my wife's old key fob broke, so I tried removing the pin to just change the key itself, but the…