💡 Flexible LED Strip Lights by Foxdam - 16.4ft/5m, 300 SMD 5050 LEDs, Waterproof, 12V Light Strips for Home, Holiday, Party Decor - Indoor/Outdoor (White) Review

So far the LEDs are holding but the glue is terrible. It even detached from the strip itself before it was attached to anything, after which it completely became unattached. I wiped the surface first with rubbing alcohol, then with an adhesive promoter (mostly an alcohol wipe with a very light primer) - the adhesive then adhered well to the surface but pulled the strip back off after just 2 days of dry mid 70's weather. In short, great strip, glue is rubbish. If you use this you will have a…

***READ BEFORE PURCHASING*** Lots of negative reviews about liability. Adhesive is essentially a very sticky double-sided tape with a paper backing. Make sure that the adhesive does not come off with the backing paper. Mine started glowing and the lights came on but not like they should. After reapplying the glue and backing paper and removing only the backing paper, they stick well. I've installed 3-4 of these strips and the adhesion is on par with any others I've installed. These lights are…

I installed these in an old fluorescent lamp for replacement in the workshop. Each strip consumes 9.117 watts at 12 volts. Be careful with high voltage, when you need brightness, there will be overheating or undervoltage. install on metal strip as heat sink for better LED performance. The power supply can not be too small or too big in size or voltage. I will return to LED life later this year. Then I hot glued it on, the glue is bad (3M Corp Junk), they won't stay in place very long. Installs…