🚪 Frost King A59/36H Silver Premium Aluminum & Vinyl Door Sweep - 1-5/8" x 36" - Enhanced SEO-friendly Description Review

Moved to a new apartment, there was a 1/4 gap in the door to let in light, some pesky spiders/centipedes and air. This solved the problem in about 5 minutes. Just stick it on the door, mark the mark if the door size is less than 36 inch. Then use a hacksaw or side cutters if you don't have a hacksaw like I did lol. with the supplied screws and adjust it in height. And you're good to go.

It helped! There was a 1 inch gap at the bottom of the door! Easy to install although I had to shave it a bit to fit the width of the door and I had no trouble with the screws provided. Retains heat from the heater during operation. Cold air from the air conditioner in winter and summer. It was installed from the inside and fits so well that I don't have to use a roll of fabric to keep drafts out.

Inexpensive, easy to trim and best of all quiet! Our previous door cleaner became brittle and became noisy and squeaked. It was an easy install and it bent easily to fit our slightly uneven door surface. Cutting to size with a hacksaw left me with no screw hole on one end and too lazy to take a drill, so I tried driving a screw right through the aluminum and it worked, although admittedly it didn't work. easy and fast. But it can be done if you are that lazy!

Replaced the brush on the front door in my community. Prevents drafts by sealing the underside of the door and threshold. Included are small sheet metal screws which I used to mount it to the base of the steel door. I had to pre-drill holes in the door to put the screws in. Trimmed the length with a Dremel cutting wheel as I previously used a hacksaw which left a jagged, ugly end. I also just made one cut and placed it at the end of the hinge as the factory cut looked even better. The rubber…