🖨️ Gizmo Dorks 2 85mm Filament Printers for Additive Manufacturing Solutions Review

Wow I had to use half a spool to find the right settings for this filament. With my Airwolf3D HD I had to slow it down, lower the extruded temperature to 185*C and put a desktop fan next to the printer (on top of the extruded fan). I usually print PLA at 210-220°C and I've read that the black should be a bit colder, but I had no idea how much of it leaked out and dragged all my supports over my print, making it impossible to settle down to separate. I don't know if I missed it somewhere or if…

I have now printed about half a roll of this filament on my Ultimaker 2+. So far I've been impressed when printing with a 0.6mm nozzle on "high" or "normal" settings. The main non-detailed parts come out as I expected. This material was ideal for making simple parts with minimal detail. However, when printing with a 0.4mm nozzle with very precise settings, the media didn't work well at all. The material came out in streaks and drips and the nozzle was closed several times. I was able to…

I have several colors of Gizmo Dorks PLA 3mm thick. So far I've had good results with all of them. Being PLA this white shows through a bit, but after properly cleaning up the previous color (orange in my test print) I got a nice clean white for my test. I sell my 3D printing services online and always make sure I leave home with this print. I highly recommend it as a filament brand (I also like their ABS). My setup is a Lulzbot TAZ 4 (with a hexagon hot end, so actually 4.5). Heated PET film…