Header banner
Revain logoHome Page
📺 gofanco extender configurable 1080p，h 264 hdextip: enhanced hd video extension solution logo

📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution Review

9

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🔌 Computer Cable Adapters, 🖥 Computer Accessories & Peripherals

View on AmazonView on ЯM

Media

(4)
img 1 attached to 📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution
img 2 attached to 📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution
img 3 attached to 📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution
img 4 attached to 📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution

Details

BrandGofanco
Connectivity TechnologyEthernet, Rs232
Cable FeatureWithout Cable
Item Weight1.17 Pounds
MaterialMetal

Description of 📺 Gofanco Extender Configurable 1080P，H 264 HDExtIP: Enhanced HD Video Extension Solution

✔ IP BASED EXTENSION – Supports One-to-One, One-to-Many, or Many-to-Many broadcasing of HDMI Signal through your IP network, utilizing H.264 compression technology for up to 394ft (120m) at 1080p@60Hz. Perfect for church services, sports bars, exhibitions, advanced home theater set ups. *Note: Dedicated IGMP Gigabit Switch is recommended for best performance and reliability. ✔ SCALABLE MATRIX – Allows up to 256 TX/RX combined units (limited to 100 TX’s) over IP network. Choose and broadcast any topology combination of Transmitters and Receivers simultaneously to create a large-scale Matrix. Transmitter (TX, part# HDExtIP-TX) & Receiver (RX, part# HDExtIP-RX) are sold separately. ✔ 4 SWITCHING OPTIONS – IR remote, push buttons, PC control via software, and wireless control app (Matrix controller) to switch between different sources from the receiver side, as if changing TV channels. *Note: Wireless control app requires a wireless access point installed on the LAN. Please check out user manual for installation instruction. ✔ ADDITIONAL FEATURES – HDMI loopout on the TX for a local display; IR extension to control the HDMI source device at a remote location; and RS-232 extension to control RS-232 enabled devices. H.264 compression technology used to run HDMI signal over TCP/IP network and provide and high quality video. **NOTE: If audio does not pass through while connected to an HDMI 2.0 port, turn off HDMI 2.0 features to that port or switch to an HDMI 1.4 port. ✔ SIMPLE INSTALLATION – No driver installation; Metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE and RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, visit our gofanco website or click on our name in the buy box and select "Ask a Question".

Reviews

Global ratings 9
  • 5
    9
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Great product for DVI to HDMI adapter

I was skeptical because of the price. Usually the transmitter and receiver are much more expensive but so far they work great, I have 4 units on this one and one of them is in a completely different office. Excellent goods.

Pros
  • handy
Cons
  • uncertain

Revainrating 5 out of 5

This works well for computer accessories and peripherals.

I haven't had any problems so far. Easy installation and configuration. I will buy another receiver for another room in the house. If I had one complaint it would be that the Cat5e/6 status light is bright and blinking. I put tape on it.

Pros
  • Great design
Cons
  • Crumpled

Revainrating 5 out of 5

Great way to build your own matrix switcher

Ideal for distributed AV installations. Use this to broadcast a Comcast cable box to 3 other TVs. By using the IR pointed at the RX block to control which TX it's set to, I can select from multiple sources. I just wish it was POE instead of needing another wall spice.

Pros
  • Ideal for outdoor activities
Cons
  • Big and bulky

Revainrating 5 out of 5

Works well on 140ft Cat 6 runs

Item works as described. We use two of these receivers and one transmitter in an isolated network to send video from the ballroom's AV booth to two 65-inch displays at the front of the ballroom. The signal is routed through an unmanaged switch and 140-foot Cat-6 cable. If you tune both receivers to the same channel, the display transmitted through the transmitter will be duplicated.

Pros
  • Delivery was very quick
Cons
  • So so

Revainrating 5 out of 5

The IP kit works great over my existing UK network, I've added managed switches.

Used to extend the display of my security system. The IP kit works great over my existing UK LAN, I've added managed switches and split traffic into a separate VLAN, only to keep traffic where it's really needed both VLANs share the same CAT5e trunk, running on GB between the two switches. with no noticeable performance issues on any of the VLANs. I had to reset the transmitter this morning after leaving it on for 2 days, we'll see if that becomes a problem. The remote response seems quick…

Pros
  • Great price
Cons
  • Long time

Revainrating 5 out of 5

Pretty cool way to build your own router

Ideal for distributed AV setup Use this to connect a Comcast cable box 3 other TVs to send. By using the IR pointed at the RX block to control which TX it's set to, I can select from multiple sources. I just wish it was POE instead of needing another wall spice.

Pros
  • ✔ ADDITIONAL FEATURES - HDMI out on TX for local viewing; IR extender for remote control of HDMI source device; and an RS-232 extender for controlling RS-232 devices. H.264 compression technology to transmit HDMI signals over a TCP/IP network and deliver high-quality video. **A NOTICE. If no sound comes through when connecting to an HDMI 2.0 port, disable HDMI 2.0 capabilities for that port or switch to HDMI 1.4 port
Cons
  • Expensive

Revainrating 5 out of 5

Runs over 140ft Cat 6 runs

Item works as described. We use two of these receivers and one transmitter in an isolated network to send video from the ballroom's AV booth to two 65-inch displays at the front of the ballroom. The signal is routed through an unmanaged switch and 140-foot Cat-6 cable. If you tune both receivers to the same channel, the display transmitted through the transmitter will be duplicated.

Pros
  • ✔ IP BASED EXTENSION - Supports one-to-one, one-to-many, or many-to-many HDMI signals transmitted over your IP network using H. 264 compression technology. up to 120 m (394 ft) at 1080p@60Hz. Ideal for church services, sports bars, trade fairs, modern home cinemas. *Note. A dedicated Gigabit IGMP switch is recommended for best performance and reliability.
Cons
  • Some defects

Revainrating 5 out of 5

The IP kit works great over my existing UK network, I've added managed switches.

Used to extend my security screen. The IP kit works great over my existing UK LAN, I've added managed switches and split traffic into a separate VLAN, only to keep traffic where it's really needed both VLANs share the same CAT5e trunk, running on GB between the two switches. with no noticeable performance issues on any of the VLANs. I had to reset the transmitter this morning after leaving it on for 2 days, we'll see if that becomes a problem. The remote response seems quick, less than a second

Pros
  • ✔ EASY INSTALLATION - no driver installation required; The metal housing ensures durability and minimizes EMI/RFI interference. FCC, CE and RoHS compliant. Our products are backed by a 1-year limited warranty and an experienced Silicon Valley-based technical support team. If you have any questions or doubts, please visit our Gofanco website or click on our name in the purchase window and select "Ask a question".
Cons
  • Not bad, but...

Revainrating 5 out of 5

Easy to set up and works like a charm

In my opinion, HDMI over IP is the best video distribution solution I've seen in a long time, and it makes it easy. It's hard to tell if the video quality has degraded at all. I didn't test it for latency as it's used in places where it's imperceptible. We use them in our church for distribution to children's rooms, lobbies and outbuildings. I love that if I want to add another source like TV shows, DVD player etc in the future, all I have to do is add more channels. We removed all of our…

Pros
  • ✔ 4 SWITCH OPTIONS - IR remote, buttons, PC software control and wireless control app (Matrix Controller) to switch between different sources from the receiver side, just like changing TV channels. *Note. The Wireless Control app requires a wireless access point installed on the local network. Please refer to the user manual for installation instructions.
Cons
  • Legacy model