🔧 GUNSON G4062 Eezibleed Kit: Effortlessly Bleed Your Brakes with Ease! Review

Worked well for bleeding the MGB clutch. The brakes are next when they run out. Make sure you have 30psi tire pressure and open the bleed screw to allow good flow. Have a bottle with enough fluid to keep the master cylinder level.

Worked as advertised. I used a 12" trailer tire as my air source and only had to pressurize it once, flush the DOT 5 fluid from all the brakes and clutches and replace with DOT 4 fluid. Much easier than bleeding and a much better vacuum approach surprised to find the kit was shipped from the UK so shipping takes a little longer than regular Revain free shipping.

Good idea, poor workmanship. The brass nipple that goes through the lid is short enough that the two fiber washers won't let you compress the rubber gasket, lid, and washers. At first I tried a screw but it still only worked without washers. Then it leaked everywhere. I was hoping the UK product would work well on my UK car. This only delayed the process as it had to come from England. . Received after 3.5 weeks.

The included cartridge that connects the fluid bottle to the tire's air valve leaks too quickly, causing the tire to lose air. The air port cartridge is cheap stamped metal and even after several hours of fiddling I couldn't get it to seal. The seller stated that he had sold many of these cartridges and that the defective cartridge was unusual. They responded very quickly and refunded the money. The seller gets 5 stars for customer service.