🚗 DWVO Headlight Assembly: Black Housing for 94-02 Dodge Ram 1500/2500/3500 Review

Lenses are nice and clear. The first side (driver's side) went smoothly. The passenger side was a struggle. The latches on the adjustment screws bounced constantly, and the side lens fell forward. Finally I aligned and pasted everything. I'm still having problems with the clamps, I was driving on a bumpy road and they popped out. Luckily I didn't lose anything. They are much better than my old ones.

like the lens, not the reflections, they don't match the focus rays properly on the road, lateral spread of light is not clear enough to look confident, stick bubbles and only a slight improvement over the standard lens , the driver's side does not adjust very well, the passenger next to the right leg is broken in the box, looks well packaged, the adjustment screws do not hold, replaced with old standard viewfinder rubber seals that slide out when the hood is removed is closed, looks good.

Generally they are poor/cheaply made, they barely work, they have a poor light pattern and after trying different types of bulbs the light diffuser in one of them is already falling apart and sagging, i will inevitably end up taking them out and throwing them in the trash, i think you get what you pay for. The only thing they have is that they look pretty decent on a truck, but are practically useless in terms of functionality on a 1998 Dodge Ram.

These headlight housings are a good replacement for factory housings. Installation is a little easier than removing the originals by loosening the set screws and removing the inside. Just be sure to re-tighten the screws to avoid tearing off the screw head as the material is a bit soft. With new LED lamps, the body creates a beautiful cone of light and illuminates the road like a new modern truck. Easy to set up. I can highly recommend them as a replacement for the factory headlights.

You look good, so it's good. They don't work very well, it's difficult to drive in the dark. I also find them difficult to set up. I'll try some expensive lightbulbs and see if that helps. I have a history of intricate little plastic tabs breaking and destroying entire plastic assemblies so booked a body repair for about $80, can't comment on the ease of installation. I didn't find many headlight replacement options on my Dodge 3500 02 so I gave it a try. I wish they worked as well as they…

98 Dodge Ram 2500. Difficult to install and had to remove the front bumper whichever headlight would be. I installed them and adjusted the front bumper and the headlights came out of the gaps a bit. I thought I could live with that. I pulled the truck 30 feet from the wall and started adjusting (hoping the fender clearances would even out) when I turned the adjustment screw up/down a metal bracket flew out from under the truck. found and reinstalled on light, but it just doesn't fit. I tried…

How - clarity on a 2001 Dodge 1500. Got all the chrome for our truck. Looks great, installation is easy as described on YouTube by A1Auto. Installation was easy, but be *careful* as the turn signal and headlight lenses, poly, can crack if force is applied. Require a Phillips screwdriver and then pry the turn signal from the assembly. ** Don't do what I did but hit the back of the turn signal lightly and watch it fall to the concrete floor, cracking and breaking ** Otherwise, watch the turn…