🔝 Highlifter HLK500-00 2" Suspension Lift for Honda TRX500 Foreman/Rubicon 2000-2008: Boost Performance and Ground Clearance Review

Didn't have all the hardware to install it on my '08 Foreman 500 4x5 and the instructions are for a newer quad, not of my year, you will need the instructions really improve and make sure all hardware is included for all years covered by the kit

The lift kit was easy to install although it took over 2 hours as per the instructions and the instructions were a bit difficult to understand. But with a little help, we installed the kit with no problems. Now my 26" moodlights should be 28".

This kit is missing 2 small inserts that fit between the front strut mounts to prevent the strut from moving back and forth on a bolt. This can be seen in the photos here and in the instructions (who needs this?). It's a pretty quick install, but the lack of those two pieces sucks because now I have to make my own. I would honestly say no, spend the extra $10 and buy another lift kit. It would be nice if the kit included everything that is pictured.

The lift installs quickly and easily. It is extremely important to follow the instructions, but they must be clear and concise. My Honda Foreman Rubicon saw every detail of the lift and looks great. After lifting, the axles and CV joints are at a narrower angle than before (as to be expected), this has caused them to go beyond their original wear pattern and start clicking. I replaced the axles with new ones and easily fixed the problem. So if you have an older car you might want to consider…