🚙 Hooke Road TJ Wrangler Pillar Light Switch Pod Panel with 4X Rocker Switches - Driver Side for Jeep Wrangler TJ (1997-2006) Review

Great product except you have to remove the speaker for it to work. Otherwise you cannot route the wiring from the back of the panel.

Came up and works. I had to flip the speaker while working with a 2006 LJR. Switches are not very comfortable, but in the worst case they can be replaced with better ones. There are no installation instructions or labels. Not many new products for TJ/LJ come out these days, I was glad this was offered.

A quality product that is well built and easy to install, but you sacrifice a speaker that stays in place. I'd like the switches at this point, but I was willing to give up or move the speaker. For this reason I returned it and installed the switches elsewhere.

Loved that the switches came pre-wired. With all the wiring done and everything ready for final assembly, I saw that the top switch on the tweeter was engaged. I removed the entire speaker and turned it upside down. The speaker screw pattern is the same, so the tweeter is on the bottom. This prevents the switching distance from hitting the tweeter.

Very easy installation but as some have mentioned this can damage the speaker cone. This is a simple fix, I just bent the switch pins to the left about 45 degrees and connected the wires together. phew! Problem solved and they work GREAT. Thought I could kick them in and out but no problem so far. If I run into a problem, I just pull the switches out and flip them. TOP product in my opinion!

This item is amazing. I mean what is is exactly what it should be. No fiddling with cables. All switches are pre-wired, just connect the positive 12 volts to one wire and then start running the +12 volt wires from the switches to all the lights. It is really that easy. The part is perfectly bolted to the jeep. The switches turn on and off abruptly, and the LEDs on the switches are nice and bright. I couldn't be happier

I love how clean your switches are here. It lost 1 star for a number of reasons, nothing major just some things people need to know. The fit is there, but it lasts and looks good. Then the color is out of place. I can handle little color. The last thing I had to take off was the tweeter to install this thing. So if you have an updated radio then this is what you need to do. So the bottom line is this: if you want a clean control panel that doesn't look flashy, if you can live with a few minor…