🧹 Ultimate Self-Propelled Windtunnel Belt Set: Hoover 38528034 / 38528035 Review

These are great replacement parts but they come with no instructions. It's a good idea to replace both belts, even if only one is bad or broken. We had 2 stretched and snapped straps giving off a burning smell before realizing what the problem was and looking under the brush. We got them through numbers on old belts. Came in 2 days. Outstanding service! You need to put the small strap on the inner wheel first without putting it on the stirring brush, and then put the big strap on both wheels…

Very frustrating having to get both straps especially when the other strap isn't for my car. Easy installation? HA! You'll need to remove about 10 screws, remove a couple of covers, unplug a couple of connectors, loosen the spring (the fixed part goes in the hole), gently lift another cover to remove the wheel, and then unhook the large strap to use it it can be removed. Able to put the belt is space. then reassemble. yes it was easy My vacuum cleaner is old and the plastic is getting brittle…

As the ITISJUSTME reviewer said, putting on the 2 straps and the stirring brush in the right order will save you a headache, but I have a few more suggestions I have the one Go through the process: 1) The narrow drive belt enters the belt slot first. 2) Then wrap a thick flat strap around the metal needle, bring it up to the pulley and slide the rest of the strap through. above the pulley. Since the new belt is very tight, I found that using a long flat head screwdriver or needle nose pliers…