📺 Enhance TV Mount Compatibility with HumanCentric VESA Mount Adapter Plate – Convert 75 x 75 and 100 x 100 to 200 x 200 mm VESA Patterns Review

This would be simple and easy BUT I was in a tight corner with a fixed mount and had to move the new, larger TV down and up move the page through this adapter. Otherwise I would have given it 5 stars because of its lightness. There were no holes in the slab for such displacement. So I had to mark some new spots (for the 100 x 100 bracket) and drill new holes and then chamfer them for the screw head spacing. It took some effort to get the right positions and my bevel was negligible as I didn't…

I bought a Vesa desktop monitor mount to fit my 43" TV mount but with a small problem: the screw holes were too small for the screws included in the kit . TV manufacturers, at this point, I could return this bracket and buy a very expensive desktop TV bracket, or I could choose this very strong and inexpensive plate. I didn't do this from the start because the metal on the original plate was so thin I was concerned the 16lb TV might end up bending the plate. This adapter plate holds the…

We bought a wall mount that fits VESA 100x100 for the TV we wanted to mount. Unfortunately, the concrete wall they were trying to install it on didn't suit us. A few weeks later I converted an old 37 inch TV into a (huge) PC monitor and wanted to hang it on a wall in another house. Unfortunately, this TV was VESA 200x200. Instead of buying another wall mount, I opted for this adapter plate. She did a great job. I am very happy with the end result. It's very strong and the included standoffs…

I bought the adapter because it's a single plate with multiple holes, not four separate levers, which looks like a floppy mount recipe. In that regard, this adapter is an excellent product. It's solid, well made and the holes are a perfect fit to adapt my existing 100x100 bracket to my new 200x200 TV. The supplied mounting screws are 30mm long. Even with the included spacers and washers, this is too long to install on most TVs. I had to make an extra trip to the hardware store and spend $2 on…

I am trying to mount a small TV to a https://www.amazon bracket using a 100 x 200 template. com/gp/product/B00BT7EA18 The problem with this adapter is that it doesn't match the picture. As shown in the image, this element renders all the standard 6mm diameter holes for the 75x75 and 100x100 templates to be the same size, but the 100x200 and 200x200 hole templates are actually one diameter of 8 mm. The M4 bolts that come with the TV have a built-in washer that's only 8mm in diameter, which means

Instead of replacing a wall mount that was properly attached to the stand I was looking for a mount adapter to replace it with a 20-17 year old TV with a newer TV. The first thing I found was the VESA size of the new TV (200 x 200). Knowing this, I found this particular product and gave it a try. Not only is it made of durable solid metal (as opposed to flimsy, bendable aluminum), but it also comes with 3 different sizes of mounting screws and matching spacers. The screws that are supposed to…

I bought this HumanCentric VESA Adapter Plate to connect a 23" Samsung LCD TV to a new tilt/swivel stand. I bought a square plate. , about 8.75 x 8.75 inches. The hardware disk arrived quickly and the quality looked very good. I checked that the plate fits the TV (I wanted the 100x200 size centered on the adapter plate) and it fitted perfectly. The only problem was that the 'extra' panel at the bottom covered several input ports. I was using the HDMI input so it didn't bother me. If I was using

I didn't use this board for its intended purpose but it turned out to be a good solution for my project. I used two of these to make it easier to mount/hide all the hardware behind my mom's wall mounted TV. Mom's TV has a VESA 200x200 mount. I put the TV on a wall mount and wanted to get it out of the way and out of sight. I used two of these adapter plates and installed one on each side of the VESA wall adapter. One plate is caught by two corners and exits to the right, the other plate is…