🚦 iJDMTOY Black Dark Lens Amber LED Fender Front Side Marker Blinker Lights for 2006-2014 MINI Cooper MKII (2nd Gen) R56 R57 R58 R59 Review

Before you go crazy and think it's the wrong connector, use the part where the bulb fits into the original, now it has one big hole on the new one that needs to be covered I was lazy and used duct tape but you have to use clear silicone

good fit and workmanship. As good as I expected from a $25 pair of turn signals. The lighting was bright but didn't help remove the hyperflare from the box. A few days later I installed 6 ohm pull-up resistors and that fixed the hyperflash problem. This is very easy, but is more complicated than the description promises. Only three stars.

Bought for my 2007 Mini Cooper, installed today, so far so good, I'll report back on the life of the cell later. The installation was difficult at first, but I managed it. Step by step pictures included: Step 1: Pull out the side marker (YouTube guide) Step 2: Remove the bulb Step 3: Replaceable marker to swap out, I used tape to secure the connections

There were no instructions but that's what you do.1. Pull up and remove the old display2. Disconnect by lifting the latch and unplugging3. To access the lamp you need to lift the latch and rotate the lamp housing and then pull it out4. Retractable Bulb 5. Connect the new turn signal connector to the part where the bulb was. 6 . Reconnect in reverse order to step 27 .

Product arrived 5 days earlier than expected. They were very easy to install without tools. Be sure to use lamp housings from old lanterns. The only issue I had with the headlights was that when they were installed they were VERY loose and I had to use zip ties to secure them so I only gave 4 stars. In addition, the product is very easy to install and looks great! Installed on my 2012 Mini Cooper S Countryman.

love the look. Installation was easy. If you get confused about the connectors, read the description completely. All you have to do is remove the shroud from the old connector and it fits right in. My only criticism is that I hate moisture in my headlights. This is one of the reasons I replaced the OEM kit. These are not sealed. I sealed them and I still have moisture. Come on, they work, look good and are inexpensive.

I used to buy from JDM and had no problems. These side turn signals fit perfectly into the side turn signal body, however the connector does not "snap" or snap into place. When I looked at the back of the device, I saw that there was nothing to plug it into. I just used duct tape and glued it together. Hopefully the cold weather (I live in Wisconsin) doesn't weaken the band. The time will show. I chatted on their website to let them know it's not quite right.

Adjust to 02' R53. The cable and connector don't match, so it's not plug and play. However, the lens and body are exactly the same as the OEM, with LED lighting inside, with no cover on the back, so road grime and moisture can eventually get in. So I broke out the LEDs inside and just plugged in my original socket which fitted perfectly! Original seal, original headlight, with new housing. The reason for the replacement is that the sun here in Arizona has taken a lot out of the exterior…

Looks great but often blinks when switched on. I may need to send these updates in 3 months. I didn't send them back but I should have. The left turn signal still flashes hyper when first used when starting the car. After that it works perfectly, you can live with it. as I still like the look and feel. However... After a year of inactivity on the machine, the transparent lens has yellowed. There is one big disappointment. Glad I kept the OEM. I have a 2015 F56.