🌊 Enhanced Water Filtration with Inline Coconut Activated Membrane Reduction Review

These filters are very economical and great for maintaining your water filtration system. It's easy to replace and you just need to remember that the water should flow for about a minute before drinking water.

Good filter, make sure you follow directions and flush before use or you may char load your system. I filled and poured out the ice machine bucket twice before using ice after installation to ensure clean ice, no problems since.

Very basic product but delivers every last bit of good water. I use this filter in combination with a 1 micron and then a 0.5 micron inline filter. Even after the first two filters, the water still had a "slimy" city water feeling in the mouth. This aroma filter removed that very well and now I have the next best thing for reverse osmosis water without a hydraulic tank and all that wasted water.

I'm not sure if other carbon parts reviews are coming out. Yes, you should ALWAYS rinse them until traces of free carbon are removed before using the water. I flushed it for a good ten minutes and there was no trace of carbon after that. The price is reasonable and the filter doesn't look any better or worse than the ones I've used before.

End caps opened and carbon poured out. I made the mistake of installing this thinking it would wash out. But he ended up clogging the incinerator's $300 spigot and other components. What a mess I'm in! It was a big challenge to turn it all off. Bought a better quality replacement and no problems. I recommend rinsing them straight into a bucket of water before plugging the outlet into faucets or other appliances.

Installed about two weeks ago, these filters are as easy to swap out as any we've bought in our 15 years of reverse osmosis system experience. Since the device must be removed from its place under the sink before changing the filter, this work is never quick. These filters are efficient and very economical compared to others we have used in the past. My home water, supplied by our city, measures a TDS of 208 ppm. After passing these filters, my TDS is 22ppm. Satisfied with the result, as well…

End caps opened and soot poured out. I made the mistake of installing this thinking it would wash out. But he ended up clogging the incinerator's $300 spigot and other components. What a mess I'm in! It was a big challenge to switch everything off. Bought a better quality replacement and no problems. I recommend rinsing them straight into a bucket of water before plugging the outlet into faucets or other appliances.

Installed about two weeks ago, these filters are as easy to replace as any other filter we've purchased with our reverse osmosis system in fifteen years. Since the device must be removed from its place under the sink before changing the filter, this work is never quick. These filters are efficient and very economical compared to others we have used in the past. My home water, supplied by our city, measures a TDS of 208 ppm. After passing these filters, my TDS is 22ppm. Satisfied with the…

After reading the reviews I ordered this filter anyway, knowing it might not work right out of the box. And it's not. The device is not equipped with threaded corner adapters with quick release buttons attached. So you can't just plug and play and change the filter quickly. Don't worry, I opened up the parts box (that came with the original unit) with canister keys, scraps of pipe, etc., and here they are. , the parts I needed, and even a small roll of teflon tape. I fitted these parts to the…