Header banner
Revain logoHome Page
intex instantaneous pool water heater heater 28684 logo

Intex instantaneous pool water heater Heater 28684 Review

14

·

Poor

Revainrating 3 out of 5  
Rating 
2.9
Industrial and Scientific, ⚙️ Filtration, 💧 Water Purification, ⚙️ Filtration

View on AmazonView on ЯM

Media

(10)
img 1 attached to Intex instantaneous pool water heater Heater 28684
img 2 attached to Intex instantaneous pool water heater Heater 28684
img 3 attached to Intex instantaneous pool water heater Heater 28684
img 4 attached to Intex instantaneous pool water heater Heater 28684

Photos by authors

(1)
img 11 attached to Intex instantaneous pool water heater Heater 28684

Description of Intex instantaneous pool water heater Heater 28684

Water heater Electric Pool Heater Intex 28684 is suitable for frame and inflatable pools with a diameter of up to 457 cm (capacity not more than 17,000 liters). The heater is equipped with an RCD (protection against electric shock), a water level sensor and a thermostat. For efficient operation of the heater, the water temperature in the pool must be at least 16°C and no higher than 35°C. To speed up the process of heating water, we recommend using an awning. It is forbidden to use the heater when people are in the pool!

Reviews

Global ratings 14
  • 5
    6
  • 4
    1
  • 3
    0
  • 2
    1
  • 1
    6

Type of review

Revainrating 4 out of 5

I like everything, the price and the quality are both ok.

This is the second water heater. The first one worked for more than five seasons in an enhanced mode, and in hard water, the heating element was covered with scale and eventually burned out. For such difficult conditions, an excellent result. I have here with such water, teapots can barely stand for three years.

Pros
  • purchase went well
Cons
  • the courier did not call back in advance, I had to run home from the store. Bad courier!

Revainrating 2 out of 5

I do not recommend spending my money on this.

Its only use is a pool of no more than 2 cubic meters. Probably the result should be visible in inclement weather. I just don't want to swim in it Has pros: It is easily interchangeable in series with a filter of the same manufacturer's brand. With its cons: He is meaningless. The efficiency of this heater is near zero. When there is no sun, water cools faster than it heats up. And when the sun is there, the heating comes from it 100 times faster.

I have been using this heater for about 7 years, during which time it has survived 3 pools, from inflatable to skeleton. Be prepared for the fact that it should work almost around the clock, I turn it off only while swimming. A small pool of about 10 cubic meters at a night temperature of 15-20 degrees, from a water temperature of 15 degrees, it will warm up by 4 degrees overnight, after 2-3 days at a daytime temperature of 25 degrees, there will be about 30 degrees in the pool. The pool is…

Pros
  • Durable. There is flow protection. Safe.
Cons
  • Input output under 32. Adapters are needed at 38, there is a narrowing, the flow weakens a little.

Has some pros: The heating rate corresponds to the declared. Heater power 3 kW, heating rate with heat-insulating substrate 1 degree per hour for a pool of 2.4 m3. Plus heating by solar radiation - specific power - a little less than 1 kW per 1 m2 of the pool mirror area at a time when the sun is close to the zenith (from 10 00 to 15 00). All calculations for central 2022 - Hong Kong region, summer 2022. In cloudy weather, there is no solar heating. The water cools down overnight. If you want w

In general, everything was as expected, initially I knew that it was not worth waiting for a couple of hours to heat the water by 2-3 degrees. I bought it for a share for 6k, it's worth its money. Got pros: So far it works flawlessly. The water comes out, of course, not hot, but when the water in the pool is cool, if you put your hand to the exit, you feel that it is warmer there. According to the technical characteristics, I won’t say how many degrees and for how long it heats up, because I…

Revainrating 1 out of 5

Worst product ever, disappointed with the purchase.

For medium pools and more, you need to use a type heat exchanger on the chimney, put the stove next to it. Electricity won't work. Dozens of kilowatts are needed. Therefore, there are no complaints about the device, it “well, it didn’t.” And there should be an explanation in the description. Different pros: It is made qualitatively, taking into account the frantic power consumption - 3 kW. Thick cable in a good, rubberized insulation, machine straight from the plug with a test button…

Revainrating 5 out of 5

Perfect product for any user!

Pros: Reliable security system. Built-in fuse and temperature sensor. It is because of the sensor that "problems" may arise. 1) There is no water circulation (pump), the filter is clogged (dirt, leaves .) or an air lock, the sensor heats up quickly and turns everything off. Works at +32 C. 2) If the heater is in the sun, the device overheats and history repeats itself. Shutdown. I covered the pump and heater with large white plastic buckets and plugged it all away from the pool under a tree. Ra

Revainrating 1 out of 5

I am very upset, the product is no good.

We bought a 10 m3 frame pool and the question of heating arose. Pump 2022 l/h. We studied everything, it turned out that the heating mat is the most interesting, because it heats the bottom, does not depend on the weather and eats little. Wrong put it under the bottom, a piece remained. Condensation from the pool, rain, this piece between the mat and the bottom got wet - and static appeared on the pool. In photo 3 you can see the edge. And then, in order to dry it, it is necessary to drain the…

Pros
  • Easy to install
Cons
  • On August 5 they brought it, on August 29 the heater died.