Inverter welding machine Wert MINI 200, MMA Review

Fire apparatus. Brews in three at 100-110A. The adjustment knob does not turn more than 180A, but I think this is not an indicator, and there is enough power reserve. Easily fits together with wires in a welding mask. The wires are normal copper. I have not tried continuous welding, according to the passport at 100A you can cook without interruption.

Normal apparatik - knew what he was buying. Interestingly, the instructions made a reservation about welding at a voltage of 160V - only with an electrode of 2 mm and below. Well, no one expected, of course, more . Not KKM .

Tip: insulate the "air tunnel" bolts. The distance from the cover is 2-3mm. When moving the apparatus, there will be 200% lateral accelerations, which will cause the action of inertia and the bolts to touch the metal cover! The consequences will be fatal!

An amazing device, with such dimensions, works and cooks, though I tried it 1 time (I couldn’t resist) I welded 2 rusty fittings like native ones))))

I bought for one and a half tons. I myself am not a welder, but I know how to cook on the little things. In the photo, an example of a rack at a power of 100, brews

The assembly is good, the wires included are not long, but soft. Cooked by welding this company like norms. At 120 A. an electrode with a diameter of 3 cooks not badly. For their money for the house fire.

I don’t know how to weld myself, I gave it to my father-in-law, he says that at 150A the 3 mm electrode pulls perfectly, it cuts not bad at 200Amps either, the arc is good, there is no anti-sticking, for those who know how to cook norms, for beginners no

Normal unit. Its pros: A small, lightweight device. It seems to cook. There is enough current for 3 mm (cooked at 80A). Copper wires will work. Suitable for home. Cons below: The fan is noisy, but you will not forget that the device is turned on.

I ordered it, but until the last I doubted that this apparatus would cook normally. COOK! For myself in the economy is a great thing. I recommend.

Brewed MP-3 3mm, cooks without interruption easily. The arc is ignited very simply, even by paint and rust. Stick protection works. An MP-3 2mm electrode welded a 0.5 mm thick tin with a gap. I set a small current, the arc ignited without problems. I liked the device.

I switched out the welding cable, and it still goes off with a bang when I use four electrodes. After placing my order for chameleon glasses, I found that everything had been altered.

Normal apparatus; he was well aware of what he was purchasing. It's interesting to note that the instructions included a caveat about welding at a voltage of 160V: you may only do so with an electrode that's 2 millimeters or less. It goes without saying that nobody anticipated more. Not KKM .

I advise you to buy. Has some pros: I am an amateur welder, but the device is really super for household needs, everything is adjustable, I even tested it on cutting metal. For the price, just 10 stars. Got cons: Well, here, like all welders, the cable. But this is not something to demand for such money.

Unbiased viewpoint on this item.It cooks perfectly, the soul is even, soft. The electrode fires well. Doesn't stick. Excellent for your money! I recommend!

I did not expect from this kid that he would cook in three, I took it for the sake of interest, try it and check the reviews. Interest satisfied 100% and coped with the task. Lightweight, compact size, the fan runs constantly, cooks three at 80.

Has some pros: The apparatus is quite little in size! The voltage is approximately 70 volts while the engine is not running. Let's take a look at how much has to be measured in operation for a group of wires that has a total area of 16 square millimeters (written). A bonus for paying this much! Below are some downsides: There are clumps of solder on the board, and even an SMD transistor was found strewn about within; however, the transistor did not appear to have been removed off its board. It…

I took it for welding twists in electrical installation, I liked it very much, it is light, it cooks as it should. Can't comment on metal welding.

So far, the impressions are only positive, we will continue to see how it will show in the work, for a visual comparison, I put a wireless mouse next to the photo

It cooks normally, I bought it at a discount for 1600, for this money I think it’s stupid to expect professional performance like welding for 30k+

changed the welding cable, cooks with a bang even with a four electrode))) I ordered chameleon glasses and the case everything has changed!