Header banner
Revain logoHome Page
lead-free pressure gauge, 2-1/2inch dial, glycerin filled, 0-160psi/kpa stainless steel case 1/4inchnpt lower mount measureman logo

Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN Review

7

·

Very good

·

$$
Revainrating 5 out of 5  
Rating 
4.9
🌀 Pressure & Vacuum, 🔍 Test, Measure & Inspect

View on AmazonView on ЯM

Media

(4)
img 1 attached to Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN
img 2 attached to Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN
img 3 attached to Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN
img 4 attached to Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN

Photos by authors

(1)
img 5 attached to Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN

Description of Lead-Free Pressure Gauge, 2-1/2Inch Dial, Glycerin Filled, 0-160Psi/Kpa Stainless Steel Case 1/4InchNPT Lower Mount MEASUREMAN

For pressure measuring of gas, liquid which is not corrosive to brass, also where vibration and pulsation is a concern. It is suitable for drinking water system. 2-1/2" dial size, 1/4"NPT Lower mount. Pressure range: 0-160psi/kpa double scale, big letters, easy to read. Stainless steel case, brass wetted parts, glycerin filled. Accuracy: +/-3-2-3%

Reviews

Global ratings 7
  • 5
    6
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Decent replacement compressor gauge

Replaced the manifold pressure gauge on my 10 gal. compressor. I used a slightly larger size than stock for easier reading and opted for a glycerin-filled version to give more accurate adjustments.Only note is that the gauge face is not completely submerged by the glycerin. I know you need a touch of space on the inside but using the gauge in a horizontal orientation the bubble of glycerin distorts the view of the full gauge.

Pros
  • Used it to replace the cheap, broken gauge on my shop air compressor.
Cons
  • Lead-free materials may not be as sturdy as traditional materials

Revainrating 5 out of 5

Working great for me

I use this gauge to replace the one that came with the regulator I use for air brushing. The gauge that came with the regulator was 0 - 150 which made adjusting for pressures between 15 - 25 psi a pain.

Pros
  • Nice gauge, accurate and easy to read for older eyes
Cons
  • The gauge may be difficult to clean if the glycerin filling spills out

Revainrating 5 out of 5

Good quality item on my review.

Fluid damping was crystal clear, gauge dial is easily read and all 4 of the gauges I purchased had identical readings when installed on the same manifold.

Pros
  • Used this ores as ure Guage to put on my holding tank for my 200 ft.deep well.
Cons
  • The gauge may not be compatible with all liquids and gases

Revainrating 5 out of 5

It's a good one. - my new review

It appears to work just fine on my well pump. The needle sticks slightly as pressure is going down, but it is momentary. Just hope that it stays momentary.

Pros
  • Added to my morning meds.
Cons
  • The product may not be as durable as other pressure gauges

Revainrating 5 out of 5

Tested tractor hydraulic pressure

Bought this, a fitting like to the bucket, and some loctite for hydraulic fittings. Plugged it in and was able to confirm that my hydraulics worked right but were set at their lower limits. Increased the pressure (easy, google your tractor model) and know that it is still in the safe range (from 2000 to 2400 PSI for me). This drastically improves the capabilities of my bucket and even 3 point.

Pros
  • works great
Cons
  • The product may require special care and maintenance to ensure longevity

Revainrating 5 out of 5

Air bubble is big, and not consistant between gauges

I bought two for my new water filter/softener install. The air bubble is quite large in these gauges, so it makes it hard to read if you want it vertical, and the pressure is 50-65psi. Out of the two I ordered, one read 70 psi, t he other read 65 with everything bypassed and nothing running, with another gauge reading 75psi. Not sure what is correct, but I would expect the two identical gauges to be the same, or within 1psi.

Pros
  • GOOD VALUE
Cons
  • The 1/4 inch NPT connection may not be compatible with all plumbing systems

Revainrating 5 out of 5

Works great for my opinion

Used this gauge to check hydraulic pressure on my son Kubota BX. Know that we know where we are for pressure we can get the shim kit to bring the pressure up.

Pros
  • Fit perfectly as a replacement for my well tank pressure guage.
Cons
  • The glycerin filling may expand and contract in extreme temperatures, affecting accuracy