🗄️ Liberty D68814C W TX 14 Inch Bottom Drawer Cabinet Review

Surprisingly, the perforations on the left and right sides aren't symmetrical. A hole is missing from similar hardware used on my Crate and Barrel/Land of Nod children's table. It was easy enough to insert a new screw into the new hole to match the punched holes, but it would have been more difficult. It either helps that this part has pre-punched holes, or that Revain shows more detailed photos of the hardware rather than glamorous shots. For eight dollars, we were able to fix a crate that had

Drawer slides are fine. I wouldn't expect something with two components to be anything else. The hardware to hold those slides in place is a different story. do yourself a favor When ordering these rails, also order the screws. Then, when the slides arrive, remove the screws packaged with the slides and immediately throw them in the nearest trash can. Unless, of course, you find a use for them as nails. These are without a doubt the worst screws I have ever seen. Some had no threads. Some had a

These are simple drawer bottom slides that work very well. I've used them in a number of cabinets and built the rail cabinets (1/2" spacing on each side. Two problems: 1) The instructions that came with the rails didn't help at all with the installation. Check out the manufacturer's instructions on his website 2) The right rail is for guiding the drawer while the left rail just slides without placing the drawer horizontally Had I known this before installing the rails I would have mounted the…

I wanted to use this on a dresser front. I found that they don't even work with back adapters in this app due to the size of my handmade dresser. Too wide, a little too deep. I need to add some 1.25" washers to use them as intended. But whatever, good price. To edit. Made spacers and they worked. ensure that the drawers fit snugly against the paneling. They can be tricky to install, but they worked well. My advice is to line up the guides BOTH VERTICALLY and HORIZONTALLY on the front of the…

Although the rails received high marks for ease of installation, value and strength I had to give them 3 stars overall give rating. I installed some drawers and bought these rails because I had no experience with wood, so I figured I could mess up my project without spending a lot of money on rails. Overall, installing the slide was easier than I expected (thank goodness there are online tutorial videos!). However, I threw away the supplied screws because the drill kept stripping the screw…

I had a broken drawer slide in one of my dresser drawers with a broken wheel and bent metal. Bought this item for less than $10, got both sides (drawer side and wall/receiver side it plugs into) twice (left/right side) plus screws. The only thing I had to replace was the broken drawer slide as this replacement was ideal for the existing native "receiver side" that was attached to the inside wall of the dresser. Seems to be a common/universal part that probably comes with many…

We have a Delta Children 6-drawer dresser and the wheel on the slide for two different drawers recently broke. The warranty period had long expired, so the original manufacturer had no replacement parts for me. I relied on this product because the shape of its guide and the location of the holes were very similar to those in my dresser. The instructions here turned out to be almost identical to those on our dresser (save for the color) and they worked. Marvelous! The only significant difference