🔧 MaxxHaul 70067 Adjustable Ball Mount - 5000 lbs. GTW Capacity, Black Review

In short I bought it and never used it and will never use it! As it came with two pins to attach the bar to the hitch head there was a lot of play so I bought class 8 bolts to tighten everything up but quickly found that the metal wasn't that strong! I would not buy this! Seriously, I'm not a pro or anything, but I was afraid it wouldn't work because of all the dirt.

I bought a new F350 and none of my problems reached my 7x12 AL trailer. Bought it (and a separate 2" ball) and there is just enough drop to hook the pendant and keep it level. The adjustable ball mount can be locked to the hitch with a standard receiver hitch lock. Now it looks good and should work with nose weight <500 # Great value for easy towing.

Works great so far. I recommend the clutch clamp/tensioner because the main clutch moves quite a bit. I also bought some Lowes 5/8" washers to use on the adjuster and on the main clutch to keep it from moving. Depending on whether you are using a locking pin, multiple washers (4-8) may be required. I took two washers along with my security pin lock to reduce movement on the main clutch. Will post pictures soon.

Was a good hitch until it broke in half while my husband was driving 65 on Interstate. The weight of the load was well below the maximum carrying capacity. Loaded with 5,000 pounds while towing a 3,500 pound trailer, the towed trailer weighed 800 pounds with a 1,410 pound load. We bought it in May and it lasted us until yesterday. Luckily no one was injured and our goods in the trailer were unharmed. Buying another one will be very difficult. Not broken at stud or during welding. The tube came…

I used this adjustable ball joint with my F-150 truck towing a 3500 lb RV. Our camper covers many kilometers in all road conditions. It is in good condition with very little signs of wear. The reason I bought this product was because the drawbar length is great for RV use. Because of the adjustable lowering and raising, I can use my utility trailer or RV with the lowering feature, or if I'm using my spouse's Ford Flex, I can flip it over and get the raise I want. It's well built and I have a…

Excellent performance and easy purchase. MaxxHaul 70067 8-Position Adjustable Ball Joint - 5000 lbs. GTW Capacity I use this on the back of my John Deere X730 tractor to move my trailers around the yard. I even ordered a second one to use the slider to mount my 2" ball as I use the original for my 1 7/8" ball and it works great! This thing is a beast that won't bend this pendant but does what I use it for. Create a pair of support brackets for the top of the hitch on the tractor to support the…

I have a heavy hoist that runs dry about 3500# and we load it with a lot of gear. I really wanted to pull it as straight as possible, and I got an exact 8 inch drop. Then we loaded the truck. I didn't account for the 2" drop when the truck was fully loaded with gear and people, and I would have been too low had I had an 8" non-adjustable hitch like I thought. It was a 2 minute switch to the 6.5 inch drop setting and it was almost perfect. I have one of those bolt-on clutch stabilizers and it…

Having an adjustable hitch in a farming environment is more than essential. With that help, here are the key pros and cons of this particular towbar. Per.1. Height adjustment is not possible as it can be folded over to raise the ball well above the bumper height on vehicles that are very low to the ground. The pins are made of high quality steel and the locking pins fit snugly and lock securely.3. The coating is quite thick, which means it doesn't look like lawyer shit after a few uses. Strong…

So this hitch looks exactly like the picture. You can install it one way to lower the hitch height or put it upside down to raise the hitch height, which is what I wanted. I oversized my trailer's axle and tires after a devastating puncture and the trailer was too tall for my previous hitch. This worked well and was easy to set up. Now about this support service. The one they sent me looked like it had been opened before (I'm not sure) and was missing two R-shaped safety pins (sometimes called…

This is by far the best hitch I have ever had, looks, looks and works great on my jeep wheels up. However, I have to say that I hated it when I first installed it. As mentioned in other reviews, it felt very loose in the receiver, and while I didn't drag anything with it while it was loose this way, it looks like it should be a bit noisy, especially with heavier trailers. However, to give credit, I measured the external dimensions compared to other clutches I've had - they're exactly the same…