🔧 Meihejia Shank Flush Router with Pattern Review

I needed a bottom bearing nozzle for the project. All these, I have a camp on the other end. It worked pretty well for me punching through 3/4" thick plywood. I've only used one of the kits so far, but I'm sure I'll use the rest one day. They come in their own plastic containers with that they won't be torn down.It's a good deal for the price.

So far I have used two attachments out of four. I found that the Thor collet that holds the bearing in place had a loose socket head cap screw and the collet came loose causing the bearing to fall off during use. I checked all four bits and found that they all need to tighten the Allen collet screws. This is not a product quality issue and many operators double check their equipment before using a tool. Just upside down. A good tool, perfectly cuts wood and chipboard.

These are good value parts so you get what you pay for. The set screw holding the bearing down to the smallest bit fell out and the bit ripped a large chunk out of my jig and the piece I was working on. Two medium sized cutters worked flawlessly. And the largest, the 1 1/2" cutter, is too big for the 1/4" shank. Too much tool chatter with this attachment, I didn't even try to cut with it. I was afraid the bit would fall out on its own just by turning on the router. Cheap bits for price and…