Membrane housing with fittings, 3x 1/8" clamps and check valve 1812-GPD and 2012-GPD for Reverse Osmosis systems universal Review

The RO Membrane Housing is a robust container designed to house the membrane and provide pressure force as water flows through the membrane type filter. To ensure the tightness of the membrane housing, two covers are provided located on both sides. Membrane housing for reverse osmosis systemsThis housing is equipped with classic, compact and housing filters 1812-GPD and 2012-GPDAtoll series: A-450; A-550; A-560; A-575 etc. Raifil series QM-90; RO 905-550-EZ; RO 808-550-EZ; RO 288W / 388W / 588W and DrAquaphor seriesAquaphor osmo 50; osmo 100, etc. Geyser Series Prestige ; Allegro; Prestige 2 ; nanotech, etc. Barrier SeriesBarrier Pro etc. Reverse osmosis systems are similar to the list above, they also have this housing and are fully compatible with it. Standard size 1812 and 2012 membranes are installed in the housing. Withstands large pressure surges in the plumbing system Resistant to aggressive chemicals One inlet for pretreatment water Two outlets for treated and drained water Raifil; Vontron, Geyser, Atoll, Aquaphor; Barrier, etc. A 1/4 size flexible tube is used to connect the reverse osmosis membrane body to the filter. A hole for water inlet is provided in the cover of the membrane housing. Those. SpecificationsManufacturer: aquaproFlask material: Polypropylene O-ring material: Rubber Compatibility: Standard 50/60/75/80/100/125 gal 1812 and 2012 standard membranes Feed and permeation ports: standard 1/8'' Concentration port: 1/4'' push-in Outlet angle: 90°Maximum temperature: 52°CMaximum pressure: 8.5 bar thread -1/4 Push for tube -2 pcs Corner 1/8 nar. thread with a check valve -1/4 Push for the tube -1 pc Filter tube clamps -3 pcs.