Header banner
Revain logoHome Page
enhanced conductivity carbon grease by mg chemicals logo

Enhanced Conductivity Carbon Grease by MG Chemicals Review

3

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🛢️ Industrial Lubricants, 🔒 Tapes, Adhesives & Sealants

View on AmazonView on ЯM

Media

(1)
img 1 attached to Enhanced Conductivity Carbon Grease by MG Chemicals

Description of Enhanced Conductivity Carbon Grease by MG Chemicals

Improves electrical connections between irregular or pitted surfaces and ensures electrical contact between loose or vibrating parts. Prevents arching, pitting, hotspots, and welds. Wide service temperature range of -68°C to 200°C. Volume Resistivity of 117 Ω·cm. Designed to lubricate, For a non-bleeding / non-migrating electrically conductive grease, see our 847-25ML Carbon Conductive Assembly Paste.

Reviews

Global ratings 3
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Works well - glue, sealant and lubricant

I had a problem connecting to the 240V network, fuses often blew. After determining that the problem wasn't overcurrent (I measured it with a current clamp) but rather overheating of a not-quite-strong connection (I heard tiny arcing noises), and the next fuse heated until it blew, this product was the solution . After carefully cleaning the wire of carbon deposits, I liberally applied this grease to the inside of the connector and tightened everything up as tight as I could. The audible arcing

Pros
  • Volume resistivity 117 ohms cm
Cons
  • Some little things

Revainrating 5 out of 5

A response to loss of continuity in hostile environments.

If you have problems with disconnects in connections exposed to the environment, I recommend this product. I repeat that a very small amount of this product makes a big difference. Don't pick it up because it's sticky and difficult to remove without lots of dish soap and a scrubbing brush. I have used it in connectors that are exposed to the elements under the hood of a car and I use a wooden toothpick to take a small amount of this product to rub the inside of the socket and then assemble the…

Pros
  • Wide operating temperature range from -68°C to 200°C
Cons
  • Damaged

Revainrating 5 out of 5

Mandatory on older vehicles

If you have an old Volvo with a bulb integrity sensor, you know my pain. Due to the age of the car (30 years old) the connections weren't tight enough due to all the vibration it had to endure. The bulbs in these older cars are held by a bulb holder which then pivots/snaps into the holder/bulb combo housing. There are many places where the chain can break, or even a little wear/corrosion will cause an intermittent connection. After cursing my car for a very long time, I applied some of this…

Pros
  • Improves electrical connections between uneven or punctured surfaces and makes electrical contact between loose or vibrating parts
Cons
  • Disappear