🔧 Moog 81090 Heavy-Duty Coil Spring Set Review

The springs fit well on the new struts I bought. Note: One of the coil springs has a label indicating it is installed on the driver's side. This was for a 1997 4Runner 4x4.

The front end of my 2007 4Runner was starting to sag so I replaced the dampers and springs. These springs were a great replacement, easy to install and fit just like the original part. The spring rate seems ideal for the weight of the car. Definitely recommend.

Installed on 2007 4runner sr5 4x4 with bilstein 5100s. (Front set to 2.5 inches) Rear Moog 81045 springs all round No problem marking with this clever bracket. Seems to be a good pen. the truck drives great with this setup so far. Very good price to recommend

Very good suspension and very stiff. Even after weeks of driving and 4 wheels they are still stiff. There may also be cheap shocks that I've used with them, but the spring compressors that I used bent badly and I definitely found the situation dangerous in many places. Pay the store for a hydraulic cylinder to compress them for you, and your body will thank you for days to come.

Installed these on my '96 4Runner with adjustable Bilstein shocks and was not disappointed. There have been rumors that some MOOG products are currently made in China but are still safe with that part number. Very happy with the quality and they are larger than OEM but you will get stock height with stock shock. I took the Bilstein shock up a notch and got 1.5 inches of travel to compensate for the two inches of rear travel. I installed MOOG springs on my old 4Runner 10 years ago and they still

I installed it on a 2008 Toyota SR5 4WD Runner. Did this with Bilstein 5100 shocks and they matched perfectly. It took me 4 hours to change tires and swap out front and rear shock absorbers and springs. This raised the rear by 1 inch and the front by 2 inches. I set the front to 1.75 like many others. I still have about 0.5 inches of rake but I like the look and how it rides. The car drives like new! Front: Moog 81090, KYB mounting kit and Bilstein 5100s shock absorbers. REAR - Moog 81045 and…

Perfect fit as an OEM replacement spring for my 2004 4Runner SR5. I installed a Billstein 5100 set at 1.75 and ended up with 2 inches of front lift. Now the ride is much better and it doesn't feel like a boat on the highway anymore. I also added 81045 springs to the rear and that added about 1/2 inch of sag from the springs. True, during transportation they crack a little. I painted over these spots prior to installation. If using Autozone spring compressors, fully unscrew the compressor screw…