Motorcycle Grips Non-Slip Rubber 7/8" 22Mm 24Mm Bar End Comfort Hand Handlebar Thruster Grip Review

I'm surprised how much I like these considering how cheap they are. They fit great on my MT 07 stock bars. The clutch side slid on easily and stay in place with some griplock. The throttle side was quite a tight fit and I had to remove the throttle tube so I could put more pressure to get it on, but it went on fine and didn't require any glue on the throttle side. Only thing I had to do was cut holes in the ends to fit the bar ends in. They're nice and grippy, and noticeably thicker than the…

Totally transformed the Ruckus. Quality grips and look awesome. Wouldn’t call this RED it’s more a maroon but I prefer it maroon as it’s a little classier. If you have a red seat this won’t match FYI. Install was easy. Make note of the inner holes as one is larger for the throttle and the smaller one is for the left handle. Cut the old one off and slide the new ones on. I heard some people using hair spray to slide it on but it wasn’t needed for mine. Slid right on and rock solid. High quality…

I put a pair of the "Yellow" colored ones on my 2020 Indian scout. The color is very close to the brown leather's color.After about a week the color faded from the portions exposed to sun (Texas for ya)After 3 months of daily riding (M-F) the grips are almost completely smooth where I normally put my hands, and the material these are made from turns black with use and sticks in the grooves.I can't decide if I am going to buy these again or go with different onesTLDR: Okay for the price, wear…

My BMW R1150R had factory heated grips and the rubber was disintegrating grip and leaving black stuff on my hands. BMW claims you have to replace the whole heated grip assembly (very expensive), but a quick look on forums told me otherwise. I was able to very carefully cut the old grip away with a razor blade, clean off the residue with carburetor cleaner, and then slide these in place. Because of the heated grip it is thicker than normal so you will have to buy two pair and use the larger…

These were purchased for a 2004 Honda 919 with 7/8 inch bars. These grips are slightly larger in diameter than the other grips they were replacing, almost making it feel as if I had 1 inch bars instead of 7/8 inch bars. At first it annoyed me, but now I kind of like it. It has loosened my grip on the bars slightly as I don't have to close my hand as far to grip it correctly. I replaced the grips at the same time I replaced my tires so I used the windex lube thing, and they slid right on.

Honestly. worked great! thought I was going to buy somthing cheap and was worried about them not fitting correctly. but, they slipped on super easy and they dont slide at all and they honestly make the bike look great! for the price and the comfort. I would recommend these to someone that just wants some new simple grips

These are great for the price. I have replaced many grips and these where perfect. Installed on my ZL600 . That's my feedback!

I installed these on my 04 Thruxton. It’s the model with 7/8 clip on bars, and these installed super easily. The right grip has a larger diameter interior to accommodate the throttle tube. The look is great, they are slightly more firm than my Oem grips, but my hands feel secure on the bars and don’t slip at all.

They went on well with the help of an air compressor. Perfect fit on my 7/8 aluminum bars. Grips feel nice on hand! Great Purchase and well worth the money.

Great in every way but the ends are solid so I had to cut them out with a razor to get my bar end mount and mirror through. That's my feedback.

Don't listen to the negative reviews about incorrect size etc etc. It's the buyers fault for not reading and seeing that these grips are specifically made for bikes with throttles. That being said, these grips are a great fit and feel. I replaced my stock Surron grips for these and couldn't be happier. Much thicker feel than stock and comfortable. One thing to note they tend to be a bit on the harder compound side which I prefer.

I bought these for my husband. He replaced the old ones on his Suzuki. He said it was super easy to install; it took about 10 minutes. He said they are very comfortable and for the price, they are awesome.

ive never had hand problems before, until i put these on my cbr 1000. they look great and feel good on the bar , but riding made my hands numb for the first time in a long time. im going back to ODI.

Very firm and you basically don't even need to glue them down. They feel great and I feel more in control of my bike. The design lacks creativity and innovation.

Product is as described. These poor folk that haven’t ever changed grips in their life have not clue that your throttle tube adds to the inner diameter of one grip. They are the same size exterior. Great new old school grips to freshen up a 30 year old bike.

One was correct the other was loose fit. I had to wrap the bar with electrical tape to get it nice and tight. Not a big deal. But what's up with the quality control?

I bought these because the price was right-however, the quality was higher than I expected. Once installed, the grips turned out to be quite comfortable.

Great price. Comfortable and easy to install. I’ve put a lot of miles on them and they are holding up great. Thanks for attention!

Have purchased two pairs of these. They grip well and I like the pattern, I have used these on two different motorcycles I’ve flipped. Had compliments on both bikes.

Had a little fall on my bike and the handle bars took a little damage. Switched out the factory grips for these and it hid the blemish perfectly. Much cheaper fix than getting new handlebars. Used on 2019 zero fxs.