📏 Precision Stainless Steel Machinist in Millimeter Measurements Review

Complete junk made in China. I laughed when I opened the package to find all three rulers were defective, with badly cut corners on the ends (see picture). Why is Revain selling this junk?

I use these to secure my spot with beaded patterns. I use a starfish-sized magnetic sheet in a protective case. I placed the pattern on the clipboard and the steel ruler marked my spot. This was my own idea and it works well. I'll try to add a photo later.

That's exactly what I wanted: a ruler with precise measurements right to the edge. I ordered them for biology/chemistry experiments when measuring the depth of a liquid in a flask. Measurements start right at the end of the ruler! Ideal!

One of my three came with a badly cut end. It had very sharp jagged edges. It seems their cutting machine choked on it and it was a bad edge. The other 2 were perfect. Keep in mind that they do not have smooth edges and are therefore not suitable for children. They don't feel like they're going to cut you, but they don't have rounded, smooth edges.

This is a machine ruler with 32 and 64 divisions in front and 0.5 and in back. If you are looking for standard 1/4 and 1/8 divisions, this ruler is not for you. The ruler has good thickness for drawing lines and will not deform. However, the edges are untreated and very sharp. Running your finger over the edge will injure the skin, so HANDLE WITH CAREFUL!

This is fantastic! Simple, effective and of decent quality (especially for the price!). The markings are embossed onto the material and are also colored so they don't rub off with use. The markings are pretty accurate; They're no match for calipers and won't give you tolerances, but they're good enough to estimate to within half a millimeter or so. The edges are clear, not broken, but also without burrs. They lie flat and have decent spring power. Note that they also have a mustache sticker in…

1 line out of 3 was 1/32 shorter but Mr. Pen sent replacements very quickly. However, I love that this item is thick enough not to bend easily, yet still lightweight. I also like the clear and numbered grid markings (from the SAE site) to make it easier to find exact measurements. I tested it with calipers and the other two rulers should be accurate too! And the sleeves for each individual ruler are a great finishing touch. All in all, this is a great product at a great price!

All three were disabled. "0", if there was one, it wasn't. Two of the three were misaligned by about 1/64" and the other by 3/64" (unusable). Again, they are offset from "0". the gradation range is accurate. If you're a machinist, you should probably run like hell. That being said, if you're a carpenter, especially a mediocre carpenter like me, they're not terrible. I use a tape measure most of the time and I'm used to "burning an inch" when I need precision so I can do the same to them. The…

These are good rulers + customer service especially at such a low price. When I originally ordered, I received an order with some imperfections (the first 1mm of 2 of the 3 rulers was cut off). I sent a quick email to the address on the flyer in the order and immediately received a polite reply that they would replace the faulty order. I received a replacement within 2 business days of receiving this email. The replacement rulers I received are very good. So I'm sure that at this price there…