🔧 NANPU Pressure Regulator Lubricator Separator: Optimize Your Pneumatic System Performance Review

The plastic oil siphon broke on the first day, causing my compressor to run continuously. No parts support. I was about to plug the hole but this size is not available. A plug M16x1.5 or M14x1.5 is sufficient. I also removed the lubricator and used the pressure regulator alone. I don't have much confidence that the regulator will last much longer. I will look for a replacement and send it back.

Installed it on my home compressor for 60 gallons (125 psi max.) weeks before I heard the noise of a massive air leaks. The plastic screw on the lubricator cap (which I never filled) blew off leaving the threaded part in the unit. The project is ongoing and there is no way to get a replacement quickly - and not being able to to reinstall by simply removing the lubricator i had to drill and tap to 3/8 and plug this destroyed the lubricator for future use, if they included two or three caps i…

Media could not be loaded. I ordered this on Deal Day Revain. I thought it would be a lot. Wow, I was wrong. It was a failure from the start. It arrived without the plug and tape. I contacted Revain and they sent me a replacement. The first returned, the second came quickly. I installed it and started testing. I hooked it up to a Craftsman 1.5hp 3.8cc. feet per minute at 90 psi on a 26 gallon tank. My compressor was set at 120psi. Nanpu was set at 100psi. That worked for a good 20 minutes…