💻 Onvian 3 Port USB Hub: High-Speed Splitter with Plug-and-Play Capability, Bus-Powered Review

I tried three USB hubs and this one worked. It worked fine the first time on a Windows 10 tablet, connected as a generic USB hub. I managed to connect a mouse and camera to the tablet. It loses a star because the ports are motion sensitive and sometimes cause peripherals to disconnect/reconnect. Update: You saw my review and immediately contacted me. They said they sent a replacement. I got a replacement and it works perfectly. They have great support and a good product which is why I've…

. Cam. It works and the dashcam is powered on and data can be written to a flash drive, but I was hoping that the USB 3 port on top would provide USB 3 power from that port to connect a phone charging cable. It supplies power but not at the USB 3 limit as I came straight from the model 3 connector. So it still charges phones, but not at the same speed as straight from the Model 3's port. I plan to include some music files in another flash drive to plug in to play music in the car. I expect this

Used on a laptop to increase the number of USB ports. It had 2 cables plugged into the back (not using the top USB3 port) and it wobbled a bit. Then, after a while, the plastic holding the USB connector broke, exposing the circuit board. I went to reassemble it (which was bad) and the fork itself wobbled. I looked at how the USB connector was attached to the internal circuit board and it looks like the soldering was done wrong. There was only solder on one side of the connector (should have…

I installed a splitter in the far right USB 3.0 port on my laptop and connected it to a rectangular USB adapter so that the USB 2.0 ports faced the back. This keeps my USB 2.0 ports close to the side of the computer where they don't get in the way of my mouse. Currently I only use one USB 2.0 port, but in the future I will use either another USB 2.0 port or a USB 3.0 port for the Yubi Key. The latter was my main reason for purchasing this splitter. The splitter fits into the adapter at an exact

I bought this for a desktop PC that has a desktop extension for two mice. It works great, the reason I needed it for this application was because I have a steel table and a mouse couldn't go under the steel. So I decided to just add both mice to one adapter like this. There are no issues with either mouse, one is a trackball and the other is a high performance gaming mouse, both were fine. Overview: The device is small and compact and very easy to hide. Oh it seems very compatible with almost…