Orion Motor Tech Fuel Pressure Gauge: Professional Fuel Injection Pressure Tester for All Fuel Systems Review

The red blown plastic case that houses all the components leaves a lot to be desired. It is very thin and does not hold the components in place once the case is closed as seen in the picture. The components aren't numbered, and even with a manual, it's hard to know which ones are used. Luckily I have calipers to measure them as some of them are interchangeable and if you accidentally swap them out you won't get the correct reading.

Looked good - many parts - nice case, but that's why I didn't buy it. I wanted it to check my fuel pressure and this is not possible for the following reason - the standard Schrader adapter pin for contacting the Schrader valve is flush with the back of the knurled clutch and there is no way the pin can come into contact with the schrader valve when screwed onto the fitting on the fuel rail. A NOTICE. BOTH FIX THE SAME PROBLEM. Sorry I tried twice and didn't even have a 50/50 chance of getting…

Bought for my 1996 Explorer to test 40-50psi fuel pressure. Right out of the box, a brass fitting (if it really is brass) is cut into the Schrader valve fitting on the fuel rail. Luckily, a small bug removed it. Instructions apply to 1991 models only. You don't really need them. There are so many fixtures out there that I was able to get them to work. There are actually a lot of fittings and adapters in this kit and I can't imagine not putting something together to measure the pressure. It's a…

I ordered this set and then changed jobs and moved to another state. I haven't opened it for 2 months and when I finally opened it it doesn't work! It was literally my first time trying to use it. All adapters appear to be of good quality but the quick connector on the gauge does not press down on the valve core on the adapter so there is no pressure at the gauge. I took it apart and made sure the gasket was in place, it was. I turned the gasket over and tried another sensor I already had. The…

I bought this kit to test my 2001 Ford F150. I could probably save money and just buy a sensor with a small Schrader valve attachment, but I wanted to be able to test other cars. When I attached the small Ford Shrader adapter I couldn't get it to seal or push through the valve pin. I checked and it was screwed all the way to the bottom of the thread. No, come on, I couldn't measure the pressure in the system. The solution was to cut about 1/8" of stock off the bottom of the adapter tube so it…

Bought thinking it would be the right adapter for my Dodge Charger 07 5.7! Can't find any information on what adapters fit in the kit! I even went to the Orion website and ended up emailing them all the info on what kit (model number there) I was looking for and what car I had! They emailed me back with a stupid reply asking for the information I had already given them. I gave them the same information as before and then they emailed me that there was no adapter that would fit my car! But I…