Pros
- Clear and effective protection, easy to apply and remove
Cons
- None are seen so far
🛡️ Ultimate Protection with Patco 5560 CLR136 Removable Protective! Review
3
·
Very good
Rating
4.5
🚸 Safety Signs & Signals, 🔐 Occupational Health & Safety Products
Media
(3)
Description of 🛡️ Ultimate Protection with Patco 5560 CLR136 Removable Protective!
Patco 5560 Removable Protective Film Tape combines a moderate tack, low adhesion acrylic adhesive with a conformable, durable polyethylene film backing that won't damage or leave residue on most surfaces. It's suitable for general protective masking on glass, metals and plastics that must be temporarily protected during assembly or shipping. It's highly conformable and is resistant to abrasion, solvents and moisture. It can be easily and cleanly removed. Patco 5560 removable tape provides just enough tack to remain adhered during a transfer process, yet since it's slightly less adhesive than blue painters tape, it is easily removable without leaving any sticky residue. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered). Adhesive: acrylic. Carrier/Backing: low density polyethylene (LDPE) film. Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier). Adhesion: 12 ounces per inch (to stainless steel test panel). Tensile Strength: 12 pounds per inch (longitudinal). Service/Operating Temperature: -40°F to 190°F. Application Temperature: 50°F to 120°F. Elongation: 500%. Core: 3 inch diameter.
Pros
- Rolls of tape are typically cut to industry standard metric sizes or approximately 5% narrower than nominal (ie 24mm per 1 inch of nominal width ordered).
Cons
- Not as thick as other picks.
Pros
- Tensile Strength: 12 psi (longitudinal). Operating/Operating Temperature: -40°F to 190°F. Application Temperature: 50°F to 120°F. Elongation: 500%. Core: 3" diameter
Cons
- Some flaws
