Pros
- Easy to apply and remove without leaving residue or damage to surfaces.
Cons
- May require frequent reapplication for extended use.
Patco 5560 TROR136 Removable Protective Review
2
·
Very good
Rating
4.3
🚸 Safety Signs & Signals, 🔐 Occupational Health & Safety Products
Media
(4)
Description of Patco 5560 TROR136 Removable Protective
Patco 5560 Removable Protective Film Tape combines a moderate tack, low adhesion acrylic adhesive with a conformable, durable polyethylene film backing that won't damage or leave residue on most surfaces. It's suitable for general protective masking on glass, metals and plastics that must be temporarily protected during assembly or shipping. It's highly conformable and is resistant to abrasion, solvents and moisture. It can be easily and cleanly removed. Patco 5560 removable tape provides just enough tack to remain adhered during a transfer process, yet since it's slightly less adhesive than blue painters tape, it is easily removable without leaving any sticky residue. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered). Adhesive: acrylic. Carrier/Backing: low density polyethylene (LDPE) film. Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier). Adhesion: 12 ounces per inch (to stainless steel test panel). Tensile Strength: 12 pounds per inch (longitudinal). Service/Operating Temperature: -40°F to 190°F. Application Temperature: 50°F to 120°F. Elongation: 500%. Core: 3 inch diameter.
Pros
- Highly elastic and resistant to abrasion, solvents and moisture. It can be removed easily and cleanly. Patco 5560 removable tape provides just enough tack to stay put during the transfer process, but because it's slightly less tacky than blue masking tape, it's easy to remove without leaving a sticky residue.
Cons
- No automatically
