💪 PC Masonry Adhesive 71120: Best Choice for Strong and Reliable PC Bonding Review

If components A and B are thoroughly mixed in equal proportions, this product is thin enough to use easily to apply leave for about 10 minutes and remove excess material from tools or site edges etc. After 10 minutes it's harder to smooth and clean tools, but because it's thicker it holds its shape better where needed. Great product for 1/2 inch or larger/deep cracks or sanded areas. The wide cure temperature range makes it a good choice for higher/colder temperature applications!

It worked, but I also bought PC epoxy in the 9 ounce tubes used in the caulk gun and I preferred a different one. A tube of epoxy made it much easier to inject epoxy into cracks with a caulk gun. The epoxy from these buckets was very thick, difficult to work with, and difficult to mix by hand. It also made it difficult to penetrate deep cracks. Also, the finished product from the tubes was much smoother and better looking than the mix from the buckets, which had a coarser texture. Both products

Update 04/03/2018: Still holding up after years and harsh winters. I took another shot on a rainy day to make the concrete look darker. A little pricey but this material has a strong bond with my existing concrete like nothing I've ever used before. This material feels tacky like Quad Sealant, but this material dries in a few hours. Too sticky, couldn't believe this epoxy would dry tight and hard like concrete. Dries to a light gray, I added some sand to soften it up. This material doesn't even